SACS 2023 Minor 2 (23.00.02.094)
SACS 2023 Minor 2 (23.00.02.094) | 2.5 Gb
Bentley Systems announces enhancements to its latest release of SACS 2023 (23.00.02.094), an offshore structural analysis application that offers fully automated and integrated 3D modeling, analysis and design to efficiently manage large, complex models for the evolving digitalization in the offshore market.
SACS 2023 (23.00.02)
SACS Marine Ultimate - Deprecated Motion/Stability Program
SACS Motion/Stability has been deprecated and replaced with SACS Motions and SACS Stability. These programs provide a more robust, full-featured solution for hydrostatic and hydrodynamic analyses with a full 3D graphical interface. SACS Motions and SACS Stability are based on the MAXSURF Motions and Stability programs.
SACS 2023 Minor 2 (23.00.02.094)
23.00.02 List of Enhancements
Dynamic Response
1275837 - Optimized memory and disk use to improve performance.
Joint Can
1276378 - Added a joint can crushing option using superposition of internal ring stresses due to brace axial forces derived from Roark’s formulas for stress and strain.
Collapse Advanced
1269368 - Fixed an issue where loads defined past the end of the member would cause Collapse Advanced to crash. A warning message is now generated and the loads which extend past the end of the member are ignored.
1275827 - Fixed an issue where Collapse Advanced would not recognize plate elements without an assigned plate group.
Data Generator
1308965 - Added grouted option to JSLC line assistant in Datagen for Joint Can analyses.
Fatigue
1228695 - Fixed an issue where Fatigue analyses could crash when a plate panel code check option was selected.
Joint Mesher
1307914 - Fixed an issue with nominal load transformation in SACS Joint Mesher for SCF extrapolation. Also fixed an issue with Joint Mesher failing to mesh shell elements.
1310524 - Fixed an issue with reported stresses for SCF Extrapolation with shell elements and Metric units. Also fixed some minor formatting errors in the SCF Extrapolation report.
Post
1259101 - Fixed an issue with Canadian CSA-16 code check where a different design code check might be performed.
Precede
1247191 - Fixed an issue with the Load by Volume tool where some elements are not correctly cut below the minimum Z level.
SACS Executive
1299936 - Fixed an issue where SACS Offshore Structure Advanced was not used for some Seastate analyses.
1314147 - Fixed an issue where the OpenWindPower - Fixed Foundation license required Offshore Select Entitlements.
Seastate
1234914 - Fixed an issue where Seastate would not write base shear and overturning moment plots for static transfer function cases.
1297096 - Improved Seastate load summation reporting to determine force couples from the relative magnitude of the load about the global axis instead of the total magnitude of the load. This will reduce the number of reported force couples.
Utilities
1292650 - Fixed an issue where Rigid would crash if the number of joints exceeded 9999. The upper limit for joints has been increased to 100000.
1269368 - Fixed an issue where loads defined past the end of the member would cause Collapse Advanced to crash. A warning message is now generated and the loads which extend past the end of the member are ignored.
1275827 - Fixed an issue where Collapse Advanced would not recognize plate elements without an assigned plate group.
Data Generator
1308965 - Added grouted option to JSLC line assistant in Datagen for Joint Can analyses.
Fatigue
1228695 - Fixed an issue where Fatigue analyses could crash when a plate panel code check option was selected.
Joint Mesher
1307914 - Fixed an issue with nominal load transformation in SACS Joint Mesher for SCF extrapolation. Also fixed an issue with Joint Mesher failing to mesh shell elements.
1310524 - Fixed an issue with reported stresses for SCF Extrapolation with shell elements and Metric units. Also fixed some minor formatting errors in the SCF Extrapolation report.
Post
1259101 - Fixed an issue with Canadian CSA-16 code check where a different design code check might be performed.
Precede
1247191 - Fixed an issue with the Load by Volume tool where some elements are not correctly cut below the minimum Z level.
SACS Executive
1299936 - Fixed an issue where SACS Offshore Structure Advanced was not used for some Seastate analyses.
1314147 - Fixed an issue where the OpenWindPower - Fixed Foundation license required Offshore Select Entitlements.
Seastate
1234914 - Fixed an issue where Seastate would not write base shear and overturning moment plots for static transfer function cases.
1297096 - Improved Seastate load summation reporting to determine force couples from the relative magnitude of the load about the global axis instead of the total magnitude of the load. This will reduce the number of reported force couples.
Utilities
1292650 - Fixed an issue where Rigid would crash if the number of joints exceeded 9999. The upper limit for joints has been increased to 100000.
iTwin Analytical Synchronizer 23.01.02 - Release Date: 13th November 2023
Maintenance Patch
This update is primarily a robustness and stability release.
API Supports
As with general practice, API releases are supported for at least three years. Currently ISM API 8, 8.1, and 9.1 are supported.
SACS 2023 Minor 2 (23.00.02.094)
SACS 2023 Minor 2 (23.00.02.094)
SACS 2023 Minor 2 (23.00.02.094)
SACS is an integrated finite element structural analysis package of applications that uniquely provides for the design of offshore structures, including oil and gas platforms, wind farms, and topsides of FPSOs and floating platforms. SACS software has been used by offshore engineers around the world for nearly 40 years. Many of the world’s energy companies specify SACS software for use by their engineering firms across the lifecycle of offshore platforms. Three options of the SACS software packages are available: Offshore Structure Enterprise for comprehensive capabilities required for typical offshore jackets, wharfs, and dolphin structures; Offshore Structure Advanced for static topside and deck analysis; and Offshore Structure for static structural analysis
SACS Offshore Structure Product Overview
Bentley Systems, Inc. is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure. Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions.
Owner: Bentley Systems, Inc.
Product Name: SACS
Version: 2023 Minor 2 (23.00.02.094)
Supported Architectures: x64
Website Home Page : www.bentley.com
Languages Supported: english
System Requirements: Windows **
Size: 2.5 Gb
SACS 2023 Minor 2 (23.00.02.094)
iTwin Analytical Synchronizer 2023 (23.01.02.064)
iTwin Analytical Synchronizer 2023 (23.01.02.064)
SACS 2023 Minor 2 (23.00.02.094)
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![SACS 2023 Minor 2 (23.00.02.094)]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
SACS 2023 Minor 2 (23.00.02.094)
