ANSYS Application Customization Toolkit (ANSYS ACT) rev.01062022

7t More-PDF V1.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Workflow
Creates 3D-PDF documents directly from within Ansys Mechanical and also standalone for other environments like CFD-PrePost, Electronics Desktop or MAPDL.
-
7t Trajectory V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Draw 3D Trajectories of vertices or nodes in graphic window, draw diagrams of path length, velocity or acceleration and export csv file with result values
-
AISC/ACI-EuroCodes Check & Design V5
Supports Ansys: 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1, 2021 R2
Target Application: Mechanical
This Trial Application allows the user to check and design their ANSYS® Workbench™ models using the American AISC/ACI, European EC2 and EC3 international construction standards for beams and shells, both Steel and Reinforced Concrete, and ACI 349 international construction standards for beams and shells.
-
ANSYS Motion V2020.2
Supports Ansys: 2020 R2
Target Application: Mechanical
The App exposes ANSYS Motion analyses in Workbench
Mechanical
-
ANSYS Motion V2020.1
Supports Ansys: 2020 R1
Target Application: Mechanical
The App exposes ANSYS Motion analyses in Workbench Mechanical
-
ANSYS Motion V2019.3
Supports Ansys: 2019 R3
Target Application: Mechanical
The App exposes ANSYS Motion analyses in Workbench
Mechanical
-
ANSYS Workbench SwiftComp GUI V1
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
ANSYS Workbench SwiftComp GUI is a plugin to power ANSYS with efficient high-fidelity multiscale, multiphysics modeling for composites. It assures the best models at a given level of efficiency in any scale the user chooses, linking micromechanics and structural analysis.
-
ANSYS Workbench SwiftComp GUI V1.01
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
ANSYS Workbench SwiftComp GUI is a plugin to power ANSYS with efficient high-fidelity multiscale, multiphysics modeling for composites. It assures the best models at a given level of efficiency in any scale the user chooses, linking micromechanics and structural analysis.
-
APDL Editor V1.1
Supports Ansys: 18, 18.1
Target Application: Mechanical
Allow for users to have an environment for writing APDL commands that is integrated with live, contextual help. Command argument recognition, command searching, and automatic help page display are all available to help streamline and debug the APDL code while it is being generated.
-
API 4F Wind Loading V1
Supports Ansys: 18
Target Application: Mechanical
Apply wind loading on solid/shell/beam geometry per API 4F guideline [Contains source code]
-
API 4F Wind Loading V1
Supports Ansys: 17
Target Application: Mechanical
Apply wind loading on solid/shell/beam geometry per API 4F guideline [Contains source code]
-
ASME Fatigue V201.4
Supports Ansys: 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
Fatigue calculation post-processing tool to plot the cycles to failure and accumulated damage according to section 5.5.3 in ASME VIII Div. 2
-
ASME Local Failure V201.4
Supports Ansys: 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
Local failure calculation post-processing tool to plot the local failure utilization ratio according to section 5.3.3 in ASME VIII, Div. 2, with the possibility to specify forming strain and/or a loading sequence.
-
ASME Material Generator V201.3
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3
-
ASME Material Generator V192.2
Supports Ansys: 18, 18.1, 18.2, 19, 19.1, 19.2
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3
-
ASME Material Generator V1
Supports Ansys: 18, 18.1
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3
-
ASME Material Generator V1
Supports Ansys: 19
Target Application: Workflow
Stress Strain Curve according to Annex 3-D, ASME 2013 VIII Div.2 / KD-231.4 ASME 2015 VIII Div.3
-
Acoustics V192.1
Supports Ansys: 19.2
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V191.1
Supports Ansys: 19.1
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V7
Supports Ansys: 17.1
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V7
Supports Ansys: 17.2
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V4
Supports Ansys: 17
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V3
Supports Ansys: 18.2
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V2
Supports Ansys: 18
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Acoustics V1
Supports Ansys: 19
Target Application: Mechanical
Expose 3D acoustics solver capabilities to perform acoustic, vibro-acoustic, contained fluid or immersed structure analyses
-
Add Images V2
Supports Ansys: 19
Target Application: Mechanical
Automatically add/remove images/figures to the outline tree. Also support the views that are created via the View Manager or use 3d mouse to orient the model before taking the image/figure
-
Add Images V1
Supports Ansys: 18
Target Application: Mechanical
Automatically add/remove images/figures to the outline tree. During the creation still possible to orient the model before taking the image/figure. Only work in combination with a 3D mouse
-
Additive Print Transfer V2020.1
Supports Ansys: 2019 R3
Target Application: Mechanical
Extension to improve the workflow of importing results from Additive Print into Workbench for post processing steps
-
Advanced Enclosure V8
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignModeler
Create fluid enclosure and decompose it to sweepable bodies [Contains source code]
-
Analysis Settings Importer V3
Supports Ansys: 19
Target Application: Mechanical
Allow to use a .csv file to import analysis settings for time stepping [Contains source code]
-
Analysis Settings Importer V2
Supports Ansys: 18
Target Application: Mechanical
Allow to use a .csv file to import analysis settings for setting step end times, toggle automatic time stepping and define substeps [Contains source code]
-
Analysis Settings Importer V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Allow to use a .csv file to import analysis settings for setting step end times, toggle automatic time stepping and define substeps [Contains source code]
-
Ansys Topology Optimization V1
Supports Ansys: 17.2
Target Application: Mechanical
Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing
-
Ansys Topology Optimization V1
Supports Ansys: 17
Target Application: Mechanical
Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing
-
Ansys Topology Optimization V1
Supports Ansys: 17.1
Target Application: Mechanical
Expose Topology Optimization capabilities in Workbench Mechanical.Optimized model can be exported and edited in SpaceClaim for performing validation study and/or 3D printing
-
App Generator for AIM V1
Supports Ansys: 19.1
Target Application: AIM
The app allows the user to create a guided simulation starting from an AIM project without writing any code
-
AutoProfile V1
Supports Ansys: 17.2
Target Application: Fluent
Convert .csv file to Fluent profile setting to check time dependent condition graphically in this wizard and set it as Fluent profile
-
AutoSubmodel V1
Supports Ansys: 18.2, 19, 19.1
Target Application: Mechanical
The Auto Submodel extension is the automation of the procedure in doing submodelling from the full model. No repetitive work needed for cutting full geometry, importing interface, resetting contacts, materials etc., as they are all automated.
-
Automatic Shape Optimization V3
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Fluent
This app automates shape optimization process. You cannot only use multi-objective or multi-condition optimization but new method combining DesignXplorer and Adjoint Solver.
-
Automatic Shape Optimization V2
Supports Ansys: 19
Target Application: Fluent
This app automates shape optimization process. As well as multi-objective or multi-conditional optimization, you can also use new method, Mixed Optimization Process, that combines DesignXplorer and Adjoint Solver.
-
Automatic Shape Optimization V1
Supports Ansys: 17.2
Target Application: Fluent
This app automates shape optimization process. As well as multi-objective or multi-conditional optimization, you can also use new method, Mixed Optimization Process, that combines DesignXplorer and Adjoint Solver.
-
Battery Design Toolkit V2
Supports Ansys: 19, 19.1
Target Application: Systems
Give the users the ability to install and use the ANSYS Battery Design Toolkit in Simplorer
-
Battery Design Toolkit V1.1
Supports Ansys: 18, 18.1
Target Application: Systems
Give the users the ability to install and use the ANSYS Battery Design Toolkit in Simplorer
-
Beam End Release V1.4
Supports Ansys: 18
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results
-
Beam End Release V2
Supports Ansys: 18.2, 19, 19.1, 19.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results
-
Beam End Release V1.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results
-
Beam End Release V2
Supports Ansys: 18.2, 19, 19.1, 19.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results
-
Beam End Release V1.4
Supports Ansys: 18
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results
-
Beam End Release V1.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose the end release feature for beam elements and enable advanced graphic post-processing for beam results
-
Beam to Link V4
Supports Ansys: 2019 R1
Target Application: Mechanical
App to convert line bodies defined in Workbench to cables, trusses or compression only elements using link180 elements
-
Beam to Link V3
Supports Ansys: 17
Target Application: Mechanical
Convert line bodies defined in Workbench to cables, trusses or compression only elements using link180 elements
-
Better Material V1
Supports Ansys: 17.2
Target Application: Mechanical
Expose mechanical-based material types as parameters inside ANSYS Workbench. Instead of varying independent numeric material properties, analyze the entire material type and leverage DesignXplorer-powered optimization studies to help you choose the best material for your simulation.
-
Bodies or Instances Converter V2
Supports Ansys: 19
Target Application: SpaceClaim
Simplify repetitive multi-body adjustments by easily defining group and layer instances of similar yet independent solid bodies (e.g., bolts, screws, washers, …)
-
Bodies or Instances Converter V1.1
Supports Ansys: 18
Target Application: SpaceClaim
Simplify repetitive multi-body adjustments by easily defining group and layer instances of similar yet independent solid bodies (e.g., bolts, screws, washers, …)
-
Bodies or Instances Converter V1
Supports Ansys: 17.1, 17.2
Target Application: SpaceClaim
Simplify repetitive multi-body adjustments by easily defining group and layer instances of similar yet independent solid bodies (e.g., bolts, screws, washers, …)
-
Bolt Result V1
Supports Ansys: 2020 R1, 2020 R2, 2021 R1, 2021 R2
Target Application: Mechanical
BoltResult scans all time steps and gives the maximum values of Axial Force, Shear at I & J, Torque, Moment at I & J in a time-dependent or time-independent analysis.
-
Bolt Toolkit V201.13
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Pre and Post processing tool to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Rivet and bolt results can be evaluated according to Eurocode 3 and VDI 2230.
-
Bolt Toolkit V192.12
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3
Target Application: Mechanical
Pre and Post processing tool to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Rivet and bolt results can be evaluated according to Eurocode 3 and VDI 2230.
-
Bolt Toolkit V192.11
Supports Ansys: 19.2
Target Application: Mechanical
Pre and Post processing toolkit to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Bolt results can be evaluated according to Eurocode 3 and VDI 2230
-
Bolt Toolkit V191.1
Supports Ansys: 19.1
Target Application: Mechanical
Pre and Post processing toolkit to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Bolt results can be evaluated according to Eurocode 3 and VDI 2230
-
Bolt Toolkit V182.1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Pre and Post processing toolkit to create groups of rivets, bolt pretension, simplified bolts and advanced bolts with thread contact section. Bolt results can be evaluated according to Eurocode 3 and VDI 2230
-
CAD Cleanup Tool V3
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignModeler
Streamline the conversion of CAD data to ANSYS Icepak objects using ANSYS DesignModeler. Easy to use GUIs can help you remove unwanted bodies, get rid of holes, and simplify geometry for analysis
-
CAESES Geometry Engine V3
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Mechanical
This app allows you to use CAESES geometry models for shape optimization with ANSYS tools. Meshing and simulation of CAESES models can be completely automated. CAESES focuses on parametric complex shapes. Typical applications: Ship hulls, turbochargers, pumps, turbines, wings, manifolds, volutes, rotor blades and impellers.
-
CAESES Geometry Engine V2
Supports Ansys: 19, 19.1, 19.2
Target Application: Workflow
Use CAESES geometry models for shape optimization. Meshing and analysis of CAESES models can be automated. CAESES focuses on parametric complex shapes. Typical applications : Ship hulls, turbochargers, pumps, turbines, wings, manifolds, volutes, intake ports, rotor blades
-
CAESES Geometry Engine V1
Supports Ansys: 19
Target Application: Workflow
Use CAESES geometry models for shape optimization. Meshing and analysis of CAESES models can be automated. CAESES focuses on parametric complex shapes. Typical applications : Ship hulls, turbochargers, pumps, turbines, wings, manifolds, volutes, intake ports, rotor blades
-
CFX2Fluent V2
Supports Ansys: 19
Target Application: Workflow
Connect CFX Setup with Fluent Setup for extended, automatable CFD analysis within the ANSYS Workbench Project Schematic
-
CFX2Fluent V1
Supports Ansys: 17
Target Application: Workflow
Connect CFX Setup with Fluent Setup for extended, automatable CFD analysis within the ANSYS Workbench Project Schematic
-
CFX2Fluent V1
Supports Ansys: 18
Target Application: Workflow
Connect CFX Setup with Fluent Setup for extended, automatable CFD analysis within the ANSYS Workbench Project Schematic
-
CFturbo V2020.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Workflow
This App enables the integration of the turbomachinery design software CFturbo into the ANSYS Workbench. In addition to a connection to TurboGrid and SpaceClaim, a bi-directional parameter update is possible. Fixed Named selections can be used to create robust workflows.
-
CFturbo V10.4
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Workflow
This App enables the integration of the turbomachinery design software CFturbo into the ANSYS Workbench. In addition to a connection to TurboGrid and SpaceClaim, a bi-directional parameter update is possible.
-
CFturbo Add-on V1
Supports Ansys: 19.2
Target Application: Workflow
Integrates CFturbo and TurboGrid to provide parametric study of pump impeller in Workbench.
-
CSV Plot V212.1
Supports Ansys: 2021 R2
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation.
-
CSV Plot V211.9
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation
-
CSV Plot V201.8
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation
-
CSV Plot V192.7
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation
-
CSV Plot V191.6
Supports Ansys: 19.1
Target Application: Mechanical
Post processing tool to create custom nodal or element contour plot from csv file including unit conversion and mid node interpolation.
-
CSV Plot V180.5
Supports Ansys: 18, 18.1
Target Application: Mechanical
Post-processing app to create custom contour plot from csv file including unit conversion
-
CSV Plot V170.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Post-processing app to create custom contour plot from csv file including unit conversion
-
CYBERNET Extensions - Result output control - V1.7
Supports Ansys: 2021 R1, 2021 R2
Target Application: Mechanical
A feature that allows you to limit the output of the result to a specific geometry or load step and reduce the size of the result file.
-
CYBERNET Toolbox V2022.1
Supports Ansys: 2022 R1
Target Application: Mechanical
CYBERNET Toolbox is a customized tool that makes Ansys Workbench more convenient to use.
-
CadToPost V3
Supports Ansys: 19, 19.1, 19.2
Target Application: Workflow
Allows Workbench users to easily import CAD into the CFDPost application
-
CadToPost V1
Supports Ansys: 17.1, 17.2
Target Application: Workflow
Allow Workbench users to easily import CAD into the CFDPost application
-
CadToPost V1
Supports Ansys: 17
Target Application: Workflow
Allow Workbench users to easily import CAD into the CFDPost application
-
CadToPost V1
Supports Ansys: 18
Target Application: Workflow
Allow Workbench users to easily import CAD into the CFDPost application
-
Command Obj to ACT V2
Supports Ansys: 19
Target Application: Mechanical
Easily convert your APDL command objects / snippets into working ACT extensions. Make it easy to create your own custom apps with your own specific APDL code [Contains source code]
-
Command Obj to ACT V1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Easily convert your APDL command objects / snippets into working ACT extensions. Make it easy to create your own custom apps with your own specific APDL code [Contains source code]
-
Compressive Only Support V1
Supports Ansys: 18.2
Target Application: Mechanical
Apply a contact compressive only support with possibility to change contact settings (keyopts and real constants)
-
Compressive Support Settings CSS V2
Supports Ansys: 19, 2019 R3
Target Application: Mechanical
A powerful tool that provides an alternative to Ansys WB’s built-in compressive support boundary condition. The functionality of Ansys Classic has been transferred to the WB environment so that the user can control all compressive support parameters in a user-friendly way. This is the second version of the extension where the user can choose between two different types of contact elements. The user can choose between CONTA174 and CONTA178 and a full spectrum of advanced settings such as: Contact algorithm, Detection method, Stiffness and many others. Thanks to this extension, advanved analyses using compressive support can be performed without the need to create additional macros, directly from Ansys WB menu. This tool has two contact support definitions: based on 174 element and based on 178 element. User has to decide which option is better in his/her model. Act app has much more options then compression only support in Ansys Workbench.
-
Convection V21.1
Supports Ansys: 2021 R1
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses.
-
Convection V2
Supports Ansys: 17, 17.1
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection V2
Supports Ansys: 17.2
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection V1
Supports Ansys: 19
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection V1
Supports Ansys: 18
Target Application: Mechanical
Expose convection with pilot node capability in steady-state and transient thermal analyses
-
Convection Links V1
Supports Ansys: 19
Target Application: Mechanical
Allow thermal exchange between nodal surfaces via convective links
-
Convert To Point Mass V1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
One click to convert solid components into point mass with automatic calculations and assignments of total mass, center of gravity location, and moment of inertia [Contains source code]
-
Coupled Diffusion V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Introduce coupled diffusion analysis (structural diffusion, thermal diffusion, and structural thermal diffusion) in both static and full transient analysis
-
Coupled Field Physics V1.2
Supports Ansys: 18
Target Application: Mechanical
Expose piezoelectric, thermal-piezoelectric and thermal-structural solver capabilities
-
Coupled Field Physics V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose piezoelectric, thermal-piezoelectric and thermal-structural solver capabilities
-
Custom Update V3
Supports Ansys: 19
Target Application: Workflow
Facilitate to automatically export various data during the �Update� process for a Component/System/Project and Design Point
-
Custom Update V2.5
Supports Ansys: 18
Target Application: Workflow
Facilitate to automatically export various data during the �Update� process for a Component/System/Project and Design Point
-
Custom Update V2.4
Supports Ansys: 17, 17.1, 17.2
Target Application: Workflow
Facilitate to automatically export various data during the �Update� process for a Component/System/Project and Design Point
-
DOE from Correlation V1
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Use parameters correlation results to create the DOE for a Response Surface Optimization and automatically deactivate minor parameters with the ability to reuse Design Point values
-
DOE from Correlation V1
Supports Ansys: 17, 17.1
Target Application: DesignXplorer
Use parameters correlation results to create the DOE for a Response Surface Optimization and automatically deactivate minor parameters with the ability to reuse Design Point values
-
Density Scaling V201.4
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Mechanical
Scale the density of selected bodies at the environment level by a factor, average density or total mass
-
Density Scaling V201.3
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Scale the density of selected bodies at the environment level by a factor, average density or total mass
-
Density Scaling V1
Supports Ansys: 18
Target Application: Mechanical
Scale the mass density of selected bodies at the environment level. Allow a local scaling of the densities of one or more bodies at the setup level, such that all other information may be shared between the two analyses
-
DesignModeler Utilities V3.41
Supports Ansys: 18, 18.1, 18.2, 19, 19.1, 19.2
Target Application: DesignModeler
Exposes some useful utilities of DesignModeler
-
DesignModeler Utilities V3.4
Supports Ansys: 17
Target Application: DesignModeler
Expose some useful utilities of DesignModeler
-
DesignXplorer Utilities V1.2
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: DesignXplorer
Additional Design of Experiments types: Full Factorial, LHS with Parameter Relationships (+ ability to match allowed values). Provide some useful utilities: Import Parameters and DOE, Correlation to DOE, RSO to Direct Optimization, Import Parameter Bounds, Export Parameter Bounds, Define Parameter Bounds by Percentage, Remove Failed DOE Points.
-
DesignXplorer Utilities V1.1
Supports Ansys: 19, 19.1, 19.2
Target Application: DesignXplorer
Additional Design of Experiments types: Full Factorial, LHS with Parameter Relationships (+ ability to match allowed values). Provide some useful utilities: Import Parameters and DOE, Correlation to DOE, RSO to Direct Optimization, Import Parameter Bounds, Export Parameter Bounds, Define Parameter Bounds by Percentage, Remove Failed DOE Points.
-
DesignXplorer Utilities V1
Supports Ansys: 18.2
Target Application: DesignXplorer
Additional Design of Experiments types: Full Factorial, LHS with Parameter Relationships (+ ability to match allowed values). Provide some useful utilities: Import Parameters and DOE, Correlation to DOE, RSO to Direct Optimization, Import Parameter Bounds, Export Parameter Bounds, Define Parameter Bounds by Percentage, Remove Failed DOE Points.
-
Direct Optimization from RSO V1
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Create a new Direct Optimization system based on the Response Surface Optimization definition and results
-
Direct Optimization from RSO V1
Supports Ansys: 17, 17.1
Target Application: DesignXplorer
Create a new Direct Optimization system based on the Response Surface Optimization definition and results
-
Dynamic Contact Angle V2
Supports Ansys: 19
Target Application: Fluent
Automatic settings of dynamic contact angle for VOF simulations. Write out a UDF source file to calculate the dynamic contact angle and build the UDF library (users do not have to directly edit and compile the UDF source)
-
Dynamic Contact Angle V2
Supports Ansys: 18, 18.1, 18.2
Target Application: Fluent
Automatic settings of dynamic contact angle for VOF simulations. Write out a UDF source file to calculate the dynamic contact angle and build the UDF library (users do not have to directly edit and compile the UDF source)
-
Dynamic Contact Angle V1
Supports Ansys: 17
Target Application: Fluent
Automatic settings of dynamic contact angle for VOF simulations on Fluent
-
EKILL/EALIVE V3
Supports Ansys: 18
Target Application: Mechanical
Expose element birth and death functionality to deactivate and reactivate bodies or contacts during structural analysis in Mechanical
-
EKILL/EALIVE V2
Supports Ansys: 17
Target Application: Mechanical
Expose element birth and death functionality to deactivate and reactivate bodies or contacts during structural analysis in Mechanical
-
EKM Model Import V1
Supports Ansys: 19
Target Application: Systems
Install the EKM model import toolkit onto Simplorer. User can use the toolkit to access and import the compatible model files on the EKM server into Simplorer
-
Electrification Package V2
Supports Ansys: 2021 R1, 2021 R2, 2022 R1
Target Application: Embedded Software
The Electrification Package for Embedded Software provides a framework for implementing the monitoring and control software of electrified systems with Ansys SCADE. The provided libraries can be used for a variety of electrification applications from electric mobility (electric aircrafts, ground vehicles) to auxiliary power electric production and storage systems.
-
Electrification Package V1
Supports Ansys: 2021 R1
Target Application: Embedded Software
The Electrification Package for Embedded Software provides a framework for implementing the monitoring and control software of electrified systems with Ansys SCADE. The provided libraries can be used for a variety of electrification applications from electric mobility (electric aircrafts, ground vehicles) to auxiliary power electric production and storage systems.
-
Electro-Thermal V4
Supports Ansys: 2019 R3
Target Application: Electronics Desktop
Automate the coupling of Electromagnetic tools (HFSS, Maxwell 3D, Q3D, HFSS Layout) to Icepak in AEDT for an electro-thermal simulation.
-
Electro-Thermal V3
Supports Ansys: 2019 R1
Target Application: Electronics Desktop
Automate the coupling of Electromagnetic tools (HFSS, Maxwell 3D, Q3D, HFSS Layout) to Icepak in AEDT for an electro-thermal simulation.
-
Electro-Thermal V2
Supports Ansys: 19.2
Target Application: Electronics Desktop
Automate the coupling of Electromagnetic tools (HFSS, Maxwell 3D, Q3D) to Icepak in AEDT for an electro-thermal simulation
-
Electronic Transformer V2
Supports Ansys: 2021 R1
Target Application: Electronics Desktop
Interface to draw the geometry and setup a solution for a transformer or inductor. A database of basic topologies and materials for the commonly used cores is included. Users can define their own winding strategy (Planar or Wound types) enabling automatic creation of all winding turns with rectangular or circular cross section. Automatically setup an Eddy Current Solution with (or without) a Frequency Sweep Definition. Consider the frequency dependent core permeability and core loss Steinmetz coefficients. Allow defining matrix connections. Process to create a frequency dependent R/L model which can be imported into ANSYS Simplorer as a Maxwell Dynamic Eddy Current component.
-
Electronic Transformer V1.1
Supports Ansys: 19.1, 19.2
Target Application: Electronics Desktop
Interface to draw the geometry and setup a solution for a transformer or inductor. A database of basic topologies and materials for the commonly used cores is included. Users can define their own winding strategy (Planar or Wound types) enabling automatic creation of all winding turns with rectangular or circular cross section. Automatically setup an Eddy Current Solution with (or without) a Frequency Sweep Definition. Consider the frequency dependent core permeability and core loss Steinmetz coefficients. Allow defining matrix connections. Process to create a frequency dependent R/L model which can be imported into ANSYS Simplorer as a Maxwell Dynamic Eddy Current component.
-
Electronic Transformer V1
Supports Ansys: 19.1
Target Application: Electronics Desktop
Interface to draw the geometry and setup a solution for a transformer or inductor. A database of basic topologies and materials for the commonly used cores is included. Users can define their own winding strategy (Planar or Wound types) enabling automatic creation of all winding turns with rectangular or circular cross section. Automatically setup an Eddy Current Solution with (or without) a Frequency Sweep Definition. Consider the frequency dependent core permeability and core loss Steinmetz coefficients. Allow defining matrix connections. Process to create a frequency dependent R/L model which can be imported into ANSYS Simplorer as a Maxwell Dynamic Eddy Current component.
-
Energy Plot V1
Supports Ansys: 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Mechanical
The extension allows evaluation of the time histories of the energies like; stiffness energy, kinetic energy, damping energy, work done by external load, artificial energy due to hourglass control/drill stiffnes or due to contact stabilization damping, and artificial energy due to nonlinear stabilization
-
Explicit Time Step V2
Supports Ansys: 19
Target Application: Mechanical
Estimate and plot the Courant-Friedrichs-Lewy (CFL) time step for Explicit Dynamics analyses, based on the currently-defined mesh and material properties, prior to executing the solution [Contains source code]
-
Explicit Time Step V1
Supports Ansys: 17
Target Application: Mechanical
Estimate and plot the Courant-Friedrichs-Lewy (CFL) time step for Explicit Dynamics analyses, based on the currently-defined mesh and material properties, prior to executing the solution [Contains source code]
-
Explicit Time Step V1
Supports Ansys: 18
Target Application: Mechanical
Estimate and plot the Courant-Friedrichs-Lewy (CFL) time step for Explicit Dynamics analyses, based on the currently-defined mesh and material properties, prior to executing the solution [Contains source code]
-
Export Figures V201.6
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Mechanical
Utility tool to export all defined figures in the model tree as png files to a custom folder or to the projects “user_files”.
-
Export Figures V201.5
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Utility tool to export all defined figures in the model tree as png files to a custom folder or to the projects 'user_files'.
-
Export Figures V4
Supports Ansys: 19
Target Application: Mechanical
Export all defined figures in the model tree as png files to a custom folder or to the projects �user_files�
-
Export Figures V3
Supports Ansys: 18
Target Application: Mechanical
Export all defined Figures in the model tree as png files to a selected folder or to the project directory �user_files�
-
Export Figures V2
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Export all defined Figures in the model tree as png files to a selected folder or to the project directory �user_files�
-
Extended Probe V1.1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Inspect deformed positions, angles and distances between nodes [Contains source code]
-
External CAD Bridge V2
Supports Ansys: 19, 19.1
Target Application: Workflow
Demonstrate how to create an application that integrates parametric study for non-ANSYS CAD Modeling programs [Contains source code]
-
External CAD Bridge V1
Supports Ansys: 17
Target Application: Workflow
Demonstrate how to create an application that integrates parametric study for non-ANSYS CAD Modeling programs [Contains source code]
-
External CAD Bridge V1
Supports Ansys: 18
Target Application: Workflow
Demonstrate how to create an application that integrates parametric study for non-ANSYS CAD Modeling programs [Contains source code]
-
Extrapolate Results V2020.2
Supports Ansys: 2020 R1, 2020 R2
Target Application: Mechanical
This app facilitates users to extrapolate the results to corner nodes of the element. This will extremely useful when the user needs result quantities on the exterior surface of the model or a nodal component.
-
FE Info V10.2
Supports Ansys: 2019 R3
Target Application: Mechanical
Expose node and element related information, such as element number, node number, nodal coordinates etc…
-
FE Info V10.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Mechanical
Expose node and element related information
-
FE Info V9.8
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Expose node and element related information
-
FE Info V9.7
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose node and element related information
-
FE Info V9.7
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Expose node and element related information
-
FSI Transient Load Mapping V4
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Map transient CFD results to thermal or structural analysis including the definition of load steps. Include CFD-post macros that also export transient data to csv files for use in External Data System for native transient data mapping
-
Fatigue Scanning V201.8
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Mechanical
Post processing tool to evaluate maximum stress or strain range from a selected range of solution steps or a Solution Combination. Results are saved in a csv file for external fatigue analysis and plotting using "CSV Plot"
-
Fatigue Scanning V201.7
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Post processing tool to evaluate maximum stress or strain range from a selected range of solution steps or a Solution Combination. Results are saved in a csv file for external fatigue analysis and plotting using 'CSV Plot'.
-
Fatigue Scanning V5
Supports Ansys: 18
Target Application: Mechanical
Post processing tool to evaluate maximum stress or strain range from a selected range of solution steps. Results are saved in a csv file for external fatigue analysis and plotting using �CSV Plot�
-
Fatigue Scanning V4
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Post processing tool to evaluate maximum stress or strain range from a selected range of solution steps. Results are saved in a csv file for external fatigue analysis and plotting using �CSV Plot�
-
Figures Manager V2.5
Supports Ansys: 2020 R1, 2020 R2, 2021 R1, 2021 R2, 2022 R1
Target Application: Mechanical
The ACT extension allows efficient change of graphical preferences of multiple result Figures from the Mechanical Outline tree. Figure properties are for each Figure displayed in a synoptic table and can be changed by multiple row selection. Export of figures with advanced options is also provided.
-
Figures Manager V2.1
Supports Ansys: 2020 R1, 2020 R2
Target Application: Mechanical
The ACT extension allows efficient change of graphical preferences of multiple result Figures from the Mechanical Outline tree. Figure properties are for each Figure displayed in a synoptic table and can be changed by multiple row selection. Export of figures with advanced options is also provided.
-
Flatness Defect V1.1
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Flatness defect evaluation of plane surfaces under loading
-
Flatness Defect V1
Supports Ansys: 17
Target Application: Mechanical
Flatness defect evaluation of plane surfaces under loading
-
Follower Loads V7
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Create follower forces and moments to follow geometric deformation. [Contains source code]
-
Follower Loads V6
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Create follower forces and moments to follow geometric deformation. [Contains source code]
-
Full Factorial DOE V1
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Expose a new DOE type in ANSYS DesignXplorer: Full Factorial, supporting up to 10 input parameters, to generate all combinations of parameter levels
-
Full Factorial DOE V1
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignXplorer
Expose a new DOE type in ANSYS DesignXplorer: Full Factorial, supporting up to 10 input parameters, to generate all combinations of parameter levels
-
Function Loading V3
Supports Ansys: 19
Target Application: Mechanical
Apply a load based on a user-defined input function that can contain multiple spatial variables. Support a variable pressure, variable line pressure and a variable heat flux
-
Function Loading V3
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Apply a load based on a user-defined input function that can contain multiple spatial variables. Support a variable pressure, variable line pressure and a variable heat flux
-
General Axisymmetric Converter V1
Supports Ansys: 19
Target Application: Mechanical
Convert 2D geometry to 3D general axisymmetric elements (geometric axisymmetry with non-axisymmetric loading). See APDL element 272 or 273 for general features. Introduce custom constraint for rigid constraint equations for working with new axisymmetric sections [Contains source code]
-
Gerotor toolkit V1
Supports Ansys: 2022 R1
Target Application: Fluent
Gerotor toolkit is a Fluent based automated solution for design and analysis of gerotor pumps. Through automation, it reduces a few hours manual preprocessing and setup work to a few minutes machine operations.
-
Gradient Extension V1.1
Supports Ansys: 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
The application is a post-treatment based ACT extension designed for Mechanical. It is compatible with all versions of ANSYS Workbench from V2019R2 to V2021R1.
-
Gradient Extension .1
Supports Ansys: 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
The application is a post-treatment based ACT extension designed for Mechanical. It is compatible with V2019R2, V2019R3 and V2020R1 versions of ANSYS Workbench.
-
Heat Balance V1.1
Supports Ansys: 19.1
Target Application: Mechanical
Creates Heat Probes for BCs and Contacts, and Export Results and Heat Balance in an Excel File located in the user_files directory
-
Hip Implant Analysis V2
Supports Ansys: 19
Target Application: AIM
Automate the structural analysis of a hip implant based on ASTM F2996-13. This wizard leads you through the steps of Geometry Import, Material Property definition, Boundary Condition specification, Solution and Results evaluation [Contains source code]
-
Hip Implant Analysis V1.1
Supports Ansys: 18
Target Application: AIM
Automate the structural analysis of a hip implant based on ASTM F2996-13. This wizard leads you through the steps of Geometry Import, Material Property definition, Boundary Condition specification, Solution and Results evaluation [Contains source code]
-
Hip Implant Analysis V1
Supports Ansys: 17.1
Target Application: AIM
Automate the structural analysis of a hip implant based on ASTM F2996-13. This wizard leads you through the steps of Geometry Import, Material Property definition, Boundary Condition specification, Solution and Results evaluation [Contains source code]
-
Honeycomb Creator V2
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignModeler
Easily create honeycomb core models from a few simple cell properties and bulk size specifications. [Contains source code]
-
Hot Keys V1.1
Supports Ansys: 18
Target Application: Mechanical
Expose additional graphics action Hotkeys in Mechanical (and Meshing) application for quick access to some common tasks
-
Hot Keys V1.1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose additional graphics action Hotkeys in Mechanical (and Meshing) application for quick access to some common tasks
-
Hot Keys Customizer V1
Supports Ansys: 19
Target Application: Mechanical
Allow a user to assign their preferred hot keys (keyboard shortcuts) to custom scripted actions [Contains source code]
-
Hot Spot Finder V1
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Find and mark high stress areas in a model. Pinball radius ensures no duplicate areas are found. Optional local coordinate systems can be generated for local mesh refinement
-
Hydrostatic Fluid V202.1
Supports Ansys: 2020 R1, 2020 R2
Target Application: Mechanical
Expose hydrostatic fluid elements in Mechanical
-
Hydrostatic Fluid V2
Supports Ansys: 18, 18.1
Target Application: Mechanical
Expose hydrostatic fluid elements in Mechanical
-
Hydrostatic Fluid V2
Supports Ansys: 19, 19.1
Target Application: Mechanical
Expose hydrostatic fluid elements in Mechanical
-
Hydrostatic Fluid V1
Supports Ansys: 17, 17.1
Target Application: Mechanical
Expose hydrostatic fluid elements in Mechanical
-
Hydrostatic Fluid V1
Supports Ansys: 17.2
Target Application: Mechanical
Expose hydrostatic fluid elements in Mechanical
-
Icepak BC Mapping V1
Supports Ansys: 2020 R1
Target Application: Electronics Desktop
This ACT helps automate the process of mapping Boundary Conditions (BCs) from one AEDT Icepak design to another.
-
Impact Velocity V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Calculate the impact velocity for a transient structural simulation. The impact is based on the contact interaction between two or more bodies/parts
-
Import Parameters and DOE V2
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Import parameters and a solved Design of Experiments into a parameterless Workbench project for the purpose of performing a Response Surface Optimization
-
Import Parameters and DOE V2
Supports Ansys: 17, 17.1
Target Application: DesignXplorer
Import parameters and a solved Design of Experiments into a parameterless Workbench project for the purpose of performing a Response Surface Optimization
-
Inertial Cones V1
Supports Ansys: 19, 19.1
Target Application: Mechanical
Creates a graphical object that displays the inertia properties of the current FEM
-
Infineon Library V2
Supports Ansys: 19, 19.1
Target Application: Systems
Give the ability to install and use the Infineon device library in Simplorer
-
Infineon Library V1.1
Supports Ansys: 18
Target Application: Systems
Give the ability to install and use the Infineon device library in Simplorer
-
Infineon Library V1
Supports Ansys: 17
Target Application: Systems
Give the ability to install and use the Infineon device library in Simplorer
-
Initial Deformation V201.4
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
ANSYS Mechanical pre-processing tool to map a deformed shape or solution combination of multiple environments, e.g. structural and buckling, as an initial condition to a structural nonlinear buckling or thermal analysis
-
Initial Deformation V201.3
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
ANSYS Mechanical pre-processing tool to map a deformed shape or solution combination of multiple environments, e.g. structural and buckling, as an initial condition to a structural nonlinear buckling or thermal analysis.
-
Initial Deformation V192.2
Supports Ansys: 19.2
Target Application: Mechanical
ANSYS Mechanical pre-processing tool to map a deformed shape or solution combination of multiple environments, e.g. structural and buckling, as an initial condition to a structural nonlinear buckling or thermal analysis.
-
Initial Deformation V180.1
Supports Ansys: 18
Target Application: Mechanical
ANSYS Mechanical pre-processing tool to map a deformed shape or solution combination of multiple environments, e.g. structural and buckling, as an initial condition to a structural nonlinear buckling or thermal analysis.
-
Installer for Twin Builder Fluid Power Library V192.1
Supports Ansys: 19.2
Target Application: Systems
The installer to install the commercial Twin Builder Fluid Power libraries (compatible with Twin Builder 2018.2) onto user’s machine. Includes Hydraulics, Pneumatics and Modelon Base libraries. Please note that the Twin Builder product and Twin Builder Fluid Power Library licenses need to be purchased separately from ANSYS.
-
Installer for Twin Builder Heating and Cooling Library V1.1
Supports Ansys: 19.2
Target Application: Systems
The installer to install the commercial Twin Builder Heating and Cooling libraries (compatible with Twin Builder 2018.2) onto user’s machine. Includes Liquid Cooling library, Vapor Cycle library, Heat Exchanger and Modelon Base libraries. Please note that the Twin Builder product and Twin Builder Heating and Cooling Library licenses need to be purchased separately from ANSYS.
-
Internal Flow V2
Supports Ansys: 19
Target Application: AIM
Custom template to enable simulation of internal flow effects in pipework systems including thermal and stress effects in the containing system (incompressible flow up to Mach 0.3) [Contains source code]
-
Internal Flow V1
Supports Ansys: 17.1, 17.2
Target Application: AIM
Custom template to enable simulation of internal flow effects in pipework systems including thermal and stress effects in the containing system [Contains source code]
-
Internal Flow V1
Supports Ansys: 18
Target Application: AIM
Custom template to enable simulation of internal flow effects in pipework systems including thermal and stress effects in the containing system [Contains source code]
-
Internal Layer V1.1
Supports Ansys: 19.2, 2019 R1
Target Application: Mechanical
Changes the material assignment of a layer of elements given a user-defined thickness that characterizes this layer
-
Internal Layer V1
Supports Ansys: 19.2, 2019 R1
Target Application: Mechanical
Changes the material assignment of a layer of elements given a user-defined thickness that characterizes this layer
-
Iterative Meshing V3
Supports Ansys: 19
Target Application: Meshing
Allow to perform multiple trials in mesh generation and auto-select the best mesh from those
-
Iterative Meshing V2.1
Supports Ansys: 17
Target Application: Meshing
Allow to perform multiple trials in mesh generation and auto-select the best mesh from those
-
Iterative Meshing V2.1
Supports Ansys: 18
Target Application: Meshing
Allow to perform multiple trials in mesh generation and auto-select the best mesh from those
-
Japanese GUI Installer for Mechanical APDL V22.1
Supports Ansys: 2022 R1
Target Application: Mechanical
Japanese GUI Installer is an installer of Japanese GUI and message text files for Mechanical APDL.
-
Japanese GUI Installer for Mechanical APDL V21.2
Supports Ansys: 2021 R2
Target Application: Mechanical
Japanese GUI Installer is an installer of Japanese GUI and message text files for Mechanical APDL
-
Japanese GUI Installer for Mechanical APDL V21.1
Supports Ansys: 2021 R1
Target Application: Mechanical
Japanese GUI Installer is an installer of Japanese GUI and message text files for Mechanical APDL
-
Japanese GUI Installer for Mechanical APDL V20.1
Supports Ansys: 2020 R1
Target Application: Mechanical
Japanese GUI Installer is an installer of Japanese GUI and message text files for Mechanical APDL
-
LHS with Parameter Relationships V1
Supports Ansys: 18, 18.1
Target Application: DesignXplorer
Expose a new DOE type in ANSYS DesignXplorer: Latin Hypercube Sampling (LHS) supporting inequalities or if-else relationships between input parameters
-
LHS with Parameter Relationships V1
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignXplorer
Expose a new DOE type in ANSYS DesignXplorer: Latin Hypercube Sampling (LHS) supporting inequalities or if-else relationships between input parameters
-
LS-Dyna Structured-ALE V1
Supports Ansys: 19.1, 19.2
Target Application: Mechanical
Provides a user interactive interface for building and running Structured-ALE (Arbitrary Lagrangian Eulerian Method) analysis in Workbench LS-DYNA. Solve high speed Fluid-Structural-Interaction problems such as under water impact and bird strike more easily.
-
LSP Model Convertor V2021.1
Supports Ansys: 2021 R1
Target Application: Mechanical
LSP Model Convertor is an act extension wizard. It can convert external model type from abaqus, radioss, nastran, ideas, pamcrash and fluent_msh file to LS-Dyna keyword format via LS_PrePost.
-
LST_PrePost V2021.1
Supports Ansys: 2021 R1
Target Application: Workflow
This Application will allow LS-Dyna user launch LS-PrePost for postprocessing within Ansys Workbench using project schematic. It also build LST_LSPP toolbar in Mechanical which are includes 6 icons(run features of LS-PrePost at Mechanical).
-
License Reporter V3
Supports Ansys: 19
Target Application: Workflow
Visualize a summary of current license usage information of users organization
-
License Reporter V2
Supports Ansys: 17, 17.1
Target Application: Workflow
Visualize a summary of current license usage information of users organization
-
License Reporter V2
Supports Ansys: 18
Target Application: Workflow
Visualize a summary of current license usage information of users organization
-
LimitState:FORM V3.5
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Optimization tool for designing strong, light components, particularly those suitable for additive manufacturing (3D printing). Provide a bridge between LimitState:FORM and ANSYS Mechanical, allowing one-click FE analysis of a LimitState:FORM design
-
LimitState:FORM V3
Supports Ansys: 17.2
Target Application: Mechanical
Optimization tool for designing strong, light components, particularly those suitable for additive manufacturing (3D printing). Provide a bridge between LimitState:FORM and ANSYS Mechanical, allowing one-click FE analysis of a LimitState:FORM design
-
Linear Buckling V1
Supports Ansys: 18.1
Target Application: AIM
Guided Simulation to select a geometry on which to perform a Linear Buckling analysis. Calculate the Euler Buckling Load [Contains source code]
-
Linearized Stresses V201
Supports Ansys: 2020 R1
Target Application: Mechanical
Customized result object for efficient post-processing of linearized stress results. Define paths while reviewing stress results. Auto scope to paths. Multiple paths in a single result object. Export to Excel. Ignore or include through thickness bending.
-
Linearized Stresses V193
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Mechanical
Customized result object for efficient post-processing of linearized stress results. Define paths while reviewing stress results. Auto scope to paths. Multiple paths in a single result object. Export to Excel. Ignore or include through thickness bending.
-
Linearized Stresses V192.9
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Create Linearized Stresses results for Static and Transient Structural analyses and export them to MS Excel. [Contains source code]
-
Linearized Stresses V190.8
Supports Ansys: 19
Target Application: Mechanical
Create Linearized Stresses results for Static and Transient Structural analyses and export them to MS Excel. [Contains source code]
-
Linearized Stresses V6
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Create Linearized Stresses results for Static and Transient Structural analyses and export them to MS Excel. [Contains source code]
-
Linearized Stresses V6
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Create Linearized Stresses results for Static and Transient Structural analyses and export them to MS Excel. [Contains source code]
-
MATLAB Optimizers for DX V3.8
Supports Ansys: 19.2
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.7
Supports Ansys: 19.1
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.6
Supports Ansys: 19
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.5
Supports Ansys: 18.2
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.4
Supports Ansys: 18.1
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.3
Supports Ansys: 18
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.2
Supports Ansys: 17.2
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3.1
Supports Ansys: 17.1
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
MATLAB Optimizers for DX V3
Supports Ansys: 17
Target Application: DesignXplorer
Expose MATLAB optimization algorithms and user programs in the Optimization component of ANSYS DesignXplorer [Contains source code]
-
Match Control Check V1.4
Supports Ansys: 17
Target Application: Mechanical
Highlight topology problems of match control and cyclic symmetry controls. Will select problematic entities from both sides (hanging edges, vertices, etc…)
-
Material Variation V201.2
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
Specify a linear variation of material properties over a region of your geometry
-
Material Variation V192.2
Supports Ansys: 19.2, 2019 R1, 2019 R2
Target Application: Mechanical
Specify a linear variation of material properties over a region of your geometry
-
Material Variation V1
Supports Ansys: 18
Target Application: Mechanical
Specify a linear variation of material properties over a region of the geometry
-
Material Variation V1
Supports Ansys: 19
Target Application: Mechanical
Specify a linear variation of material properties over a region of the geometry
-
Maxwell Technologies Library V2
Supports Ansys: 19, 19.1
Target Application: Systems
Give the user the ability to install and use the MaxwellTechnologies Ultracapacitor library in Simplorer. It includes 13 manufacture device models
-
Maxwell Technologies Library V1.1
Supports Ansys: 18
Target Application: Systems
Give the user the ability to install and use the MaxwellTechnologies Ultracapacitor library in Simplorer. It includes 13 manufacture device models
-
Maxwell Technologies Library V1
Supports Ansys: 17
Target Application: Systems
Give the user the ability to install and use the MaxwellTechnologies Ultracapacitor library in Simplorer. It includes 13 manufacture device models
-
Mechanical Custom Interface V1
Supports Ansys: 19
Target Application: Mechanical
Work in conjunction with the app Hot Keys Customizer to introduce custom and more efficient workflows for ANSYS Mechanical [Contains source code]
-
Mechanical Embedded DesignLife V201
Supports Ansys: 2020 R1
Target Application: Mechanical
Expose nCode DesignLife in Mechanical allowing the user to perform fatigue analysis.
-
Mesh Settings V201.7
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Meshing
Mesh utility tool to export/import all global mesh settings and local mesh controls in Mechanical meshing for re-use in different Workbench projects
-
Mesh Settings V6
Supports Ansys: 19
Target Application: Meshing
Mesh utility tool to export/import all global mesh settings and local mesh controls in Mechanical meshing for re-use in different Workbench projects
-
Mesh Settings V5
Supports Ansys: 18, 18.1
Target Application: Meshing
Mesh utility tool to export/import all global mesh settings for re-use in different Workbench projects
-
Mesh Settings V3
Supports Ansys: 17, 17.1, 17.2
Target Application: Meshing
Mesh utility tool to export/import all global mesh settings for re-use in different Workbench projects
-
MinervaImporter V2022.1
Supports Ansys: 2022 R1
Target Application: Mechanical
This app allows you to preview and import files from Ansys Minerva directly into Ansys Mechanical, from the Mechanical GUI.
-
MinervaImporter V2
Supports Ansys: 2021 R1
Target Application: Mechanical
Import commands, geometry, meshes, results, and condensed parts from an ANSYS Minerva server
-
MinervaImporter V1
Supports Ansys: 2020 R2
Target Application: Mechanical
Import commands, geometry, results, and condensed parts from an ANSYS Minerva server
-
Modal Mass V3
Supports Ansys: 19
Target Application: Mechanical
[Modal Mass is now a native feature in ANSYS Mechanical] Allow users to easily view a modal analysis' effective mass data without searching through the Solver Output file. [Contains source code]
-
Modal Mass V2
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
[Modal Mass is now a native feature in ANSYS Mechanical] Allow users to easily view a modal analysis' effective mass data without searching through the Solver Output file. [Contains source code]
-
Modal Mass V2
Supports Ansys: 18
Target Application: Mechanical
[Modal Mass is now a native feature in ANSYS Mechanical] Allow users to easily view a modal analysis' effective mass data without searching through the Solver Output file. [Contains source code]
-
Modal Profile Export V1
Supports Ansys: 19
Target Application: Mechanical
This app will export a mode shape from a Mechanical modal analysis. The profile exported can be read in to CFX for performing a blade flutter simulation.
-
Moment of Inertia Calculation V1
Supports Ansys: 19
Target Application: Electronics Desktop
Calculate moment of inertia of 2D and 3D objects in Ansys Maxwell and create a Band with assigned value. Allow to calculate the value not depending on it complicity and provide exact value. Help to analyze a model consider mechanical transient processes
-
Moment of Inertia Calculation V1.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Electronics Desktop
Calculate moment of inertia of 2D and 3D objects in Ansys Maxwell and create a Band with assigned value. Allow to calculate the value not depending on it complicity and provide exact value. Help to analyze a model consider mechanical transient processes
-
Moment of Inertia Calculation V1.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Electronics Desktop
Calculate moment of inertia of 2D and 3D objects in Ansys Maxwell and create a Band with assigned value. Allow to calculate the value not depending on it complicity and provide exact value. Help to analyze a model consider mechanical transient processes
-
Moment of Inertia Calculation V1
Supports Ansys: 19
Target Application: Electronics Desktop
Calculate moment of inertia of 2D and 3D objects in Ansys Maxwell and create a Band with assigned value. Allow to calculate the value not depending on it complicity and provide exact value. Help to analyze a model consider mechanical transient processes
-
Motion Loads V2.1
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Apply motion loads issued from a Rigid body analysis in a static structural analysis [Contains source code]
-
Moving Heat Source V4.1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Facilitate the definition of a moving heat source in Workbench Mechanical [Contains source code]
-
Multi Object Export V1.1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Export results for multiple objects at once and have the data combined into a single output file, avoiding the need for multiple exports and manual collection/combination of the data. [Contains source code]
-
MultiStep Parametric Loads V2
Supports Ansys: 18, 18.1
Target Application: Mechanical
Expose new parametric structural loads for multistep analyses (incl. transient). Supported loads include Force, Pressure, Moment, and Displacement.
-
MultiStep Parametric Loads V1
Supports Ansys: 17, 17.1
Target Application: Mechanical
Expose new parametric structural loads for multistep analyses. Supported loads include Force, Pressure, Moment, and Displacement.
-
Multiscale Analysis System V2.2
Supports Ansys: 19.2
Target Application: Mechanical
Evaluate anisotropic material constants for non-homogeneous material which is Lattice structure, Composite (e.g. FRP using short or long fiber), Honeycomb and so on. Template function to create microstructure model is also included in Design Modeler and SpaceClaim
-
Multiscale Analysis System V2
Supports Ansys: 19
Target Application: Mechanical
Evaluate anisotropic material constants for non-homogeneous material which is Lattice structure, Composite (e.g. FRP using short or long fiber), Honeycomb and so on. Template function to create microstructure model is also included in Design Modeler and SpaceClaim
-
Multiscale Analysis System V1
Supports Ansys: 18
Target Application: Mechanical
Evaluate anisotropic material constants for non-homogeneous material which is Lattice structure, Composite (e.g. FRP using short or long fiber), Honeycomb and so on. Template function to create microstructure model is also included in Design Modeler and SpaceClaim
-
NACA Airfoil Maker V2
Supports Ansys: 19
Target Application: SpaceClaim
Easily make NACA (National Advisory Committee for Aeronautics) airfoil geometry models for 3D fluid flow computations
-
NACA Airfoil Maker V1.1
Supports Ansys: 18.1
Target Application: SpaceClaim
Easily make NACA (National Advisory Committee for Aeronautics) airfoil geometry models for 3D fluid flow computations
-
NACA Airfoil Maker V1
Supports Ansys: 17, 17.1, 17.2
Target Application: DesignModeler
Easily make NACA (National Advisory Committee for Aeronautics) airfoil geometry models for 3D fluid flow computations
-
NHTSA - FMVSS 111 Rearview image testing V1
Supports Ansys: 19.4
Target Application: Workflow
This App allows you to use the ANSYS SPEOS OST camera sensor to validate automotive rearview image against the Federal Motor Vehicle Safety Standard 111 (FMVSS111) of the National Highway Traffic Safety Administration (NHTSA)
-
NLDIAG V2
Supports Ansys: 18
Target Application: Mechanical
Expose the nonlinear diagnostics (NLDIAG) functionality in Mechanical to identify or display the highly distorted elements
-
NLDIAG V2
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Expose the nonlinear diagnostics (NLDIAG) functionality in Mechanical to identify or display the highly distorted elements
-
Near Field Aperture Source V1
Supports Ansys: 18
Target Application: Electronics Desktop
Model radiation fields of antennas and phased arrays without modelling geometry
-
Near Field Aperture Source V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Electronics Desktop
Model radiation fields of antennas and phased arrays without modelling geometry
-
Neural Networks Package V1
Supports Ansys: 2022 R1
Target Application: Embedded Software
The Neural Networks Package for Embedded Software provides a framework for implementing embedded software based on neural networks using Ansys SCADE. The package allows to import a trained network into SCADE, using a library of common layers and activation functions.
-
OASIS-Ansys Plugin V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Workflow
Allow a direct connection between Ansys Workbench and OASIS, a powerful design exploration and optimization tool that can accelerate your design process. The plugin allows for simple setup of optimizations with your Workbench models
-
OASIS-Ansys Plugin V1
Supports Ansys: 18, 18.1, 18.2
Target Application: Workflow
Allow a direct connection between Ansys Workbench and OASIS, a powerful design exploration and optimization tool that can accelerate your design process. The plugin allows for simple setup of optimizations with your Workbench models
-
Offshore V15.2
Supports Ansys: 18
Target Application: Mechanical
Expose the MAPDL offshore features in Mechanical
-
Offshore V15.1
Supports Ansys: 17
Target Application: Mechanical
Expose the MAPDL offshore features in Mechanical
-
Pan/Zoom/Rotate Dialog V4
Supports Ansys: 19
Target Application: Mechanical
Provide a dialog box with view controls for the Mechanical graphics window. The controls allow for Pan, Zoom and Rotate in a style similar to the controls available in the Mechanical APDL interface
-
Pan/Zoom/Rotate Dialog V3
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Provide a dialog box with view controls for the Mechanical graphics window. The controls allow for Pan, Zoom and Rotate in a style similar to the controls available in the Mechanical APDL interface
-
Pan/Zoom/Rotate Dialog V2
Supports Ansys: 17, 17.1
Target Application: Mechanical
Provide a dialog box with view controls for the Mechanical graphics window. The controls allow for Pan, Zoom and Rotate in a style similar to the controls available in the Mechanical APDL interface
-
Parameter Sweep V3
Supports Ansys: 18, 18.1, 18.2, 19, 19.1, 19.2
Target Application: DesignXplorer
Create design points by sweeping parameter values
-
Parameter Sweep V2
Supports Ansys: 18, 18.1, 18.2, 19, 19.1
Target Application: DesignXplorer
Create design points by sweeping parameter values
-
Parameter Sweep V2
Supports Ansys: 17, 17.1
Target Application: DesignXplorer
Create design points by sweeping parameter values
-
Parametric Curves V2
Supports Ansys: 18
Target Application: DesignModeler
Create curves using parametric equations. Any valid Python equation or function can be used to generate parametric curves, with the ability to mark up to 50 independent coefficients as Workbench parameters
-
Parametric Curves V1
Supports Ansys: 17
Target Application: DesignModeler
Create curves using parametric equations. Any valid Python equation or function can be used to generate parametric curves, with the ability to mark up to 50 independent coefficients as Workbench parameters
-
Piezo and MEMS V2020.1
Supports Ansys: 2020 R1
Target Application: Mechanical
Expose Coupled Field Physics, piezo-electric and MEMS solver capabilities in Workbench.
-
Piezo and MEMS V19.3
Supports Ansys: 2019 R1
Target Application: Mechanical
Expose Coupled Field Physics, piezo-electric and MEMS solver capabilities in Workbench.
-
Piezo and MEMS V1
Supports Ansys: 18
Target Application: Mechanical
Expose piezo-electric and MEMS solver capabilities in Workbench
-
Piezo and MEMS V1
Supports Ansys: 17, 17.1
Target Application: Mechanical
Expose piezo-electric and MEMS solver capabilities in Workbench
-
Piezo and MEMS V1
Supports Ansys: 17.2
Target Application: Mechanical
Expose piezo-electric and MEMS solver capabilities in Workbench
-
Piezo and MEMS V1
Supports Ansys: 19, 19.1
Target Application: Mechanical
Expose piezo-electric and MEMS solver capabilities in Workbench
-
Porous Zone Calculator V1
Supports Ansys: 18, 18.1, 18.2
Target Application: Fluent
Calculate flow through a variety of porous models. Easily compute permeability and inertial resistance coefficients by providing velocity and pressure drop profiles from a .csv file. [Contains source code]
-
Pressure Vessels Automatic Path Creation V1
Supports Ansys: 19, 19.1
Target Application: Mechanical
Automate the creation of paths & linearized stress results to meet pressure vessels standards
-
Pressure Vessels Automatic Path Creation V3
Supports Ansys: 17, 17.1
Target Application: Mechanical
Automate the creation of paths & linearized stress results to meet pressure vessels standards
-
Pressure Vessels Automatic Path Creation V2
Supports Ansys: 18
Target Application: Mechanical
Automate the creation of paths & linearized stress results to meet pressure vessels standards
-
Prestressed Show Deformed Mesh V2
Supports Ansys: 19, 19.1
Target Application: Mechanical
Show the deformed mesh in downstream prestressed analyses
-
Prestressed Show Deformed Mesh V1.1
Supports Ansys: 18
Target Application: Mechanical
Show the deformed mesh in downstream prestressed analyses
-
Prestressed Show Deformed Mesh V1
Supports Ansys: 17
Target Application: Mechanical
Show the deformed mesh in downstream prestressed analyses
-
Prestressed Show Deformed Mesh V1
Supports Ansys: 17.1
Target Application: Mechanical
Show the deformed mesh in downstream prestressed analyses
-
Prestressed Show Deformed Mesh V1
Supports Ansys: 17.2
Target Application: Mechanical
Show the deformed mesh in downstream prestressed analyses
-
Probe Extension V1.1
Supports Ansys: 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
The application is a post-treatment based ACT extension designed for Mechanical. It is compatible with all versions of ANSYS Workbench from V2019R2 to V2021R1.
-
Probe Extension V1
Supports Ansys: 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
The application is a post-treatment based ACT extension designed for Mechanical. It is compatible with V2019R2, V2019R3 and V2020R1 versions of ANSYS Workbench.
-
Probe Extension .3
Supports Ansys: 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
The application is a post-treatment based ACT extension designed for Mechanical. It is compatible with V2019R2, V2019R3 and V2020R1 versions of ANSYS Workbench.
-
RADARpost V1.7
Supports Ansys: 19, 19.1
Target Application: Electronics Desktop
Post-processing reports for radar signature simulations in ANSYS Electronics Desktop. Provides automatic post-processing of range (echo) profiles, waterfall plots, inverse synthetic aperture radar (ISAR) images, and creation of Range-Doppler maps for dynamic radar scene simulation. A companion post-processing tool to the RADARpre ACT toolkit.
-
RADARpre V1.4
Supports Ansys: 19, 19.1
Target Application: Electronics Desktop
Automate analysis setup for simulation of radar Range Profiles, Waterfall plots and Inverse Synthetic Aperture (ISAR) images in the ANSYS Electronics Desktop.
-
ROM Extract V1
Supports Ansys: 18
Target Application: Fluent
Extract Linear and Time-Invariant (LTI) Reduced Order Model (ROM) from ANSYS Fluent 3-D Computation Fluid Dynamics (CFD) simulations for system-level analysis in ANSYS Simplorer.
-
RSTMAC V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Implement Modal Assurance Criterion calculation to compare the nodal solutions from two results files (.rst or .rstp) or from one results file and one Universal Format file (.unv)
-
Random Vibration Added Capabilities V4
Supports Ansys: 2020 R1
Target Application: Mechanical
Expose additional capabilities for random vibrations analysis or Power Spectral Density analysis (PSD). Make possible to apply a Pressure or Force PSD to a random vibration analysis. Enable the post processing of several nodes or elements at once.
-
Random Vibration Added Capabilities V2
Supports Ansys: 2019 R1
Target Application: Mechanical
Expose additional capabilities for random vibrations analysis or Power Spectral Density analysis (PSD). Make possible to apply a Pressure or Force PSD to a random vibration analysis. Enable the post processing of several nodes or elements at once [Contains source code]
-
Random Vibration Added Capabilities V1
Supports Ansys: 18.2
Target Application: Mechanical
Expose additional capabilities for random vibrations analysis or Power Spectral Density analysis (PSD). Make possible to apply a Pressure or Force PSD to a random vibration analysis. Enable the post processing of several nodes or elements at once [Contains source code]
-
Reaction Forces V3.1
Supports Ansys: 19, 19.1, 19.2, 2019 R1
Target Application: Mechanical
Create Probes for BCs, Contacts, Beams, Springs and Joints and Export Results in an Excel File located in the user_files directory
-
Reaction Forces V3
Supports Ansys: 19
Target Application: Mechanical
Create Probes for BCs, Contacts, Beams, Springs and Joints and Export Results in an Excel File located in the user_files directory
-
Reaction Forces V2
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Create Probes for BCs, Contacts, Beams, Springs and Joints and Export Results in an Excel File located in the user_files directory
-
Reduced Integration V1
Supports Ansys: 18
Target Application: Mechanical
Change the element behavior to reduced integration for lower order shell elements
-
Relative Displacement V4
Supports Ansys: 18, 18.1, 18.2, 19
Target Application: Mechanical
Compute Relative Displacement based on a coordinate system created using nodes in the model those can move during the simulation
-
Relative Displacement V3.4
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Compute Relative Displacement based on a coordinate system created using nodes in the model those can move during the simulation
-
Relative Displacement V3.4
Supports Ansys: 18
Target Application: Mechanical
Compute Relative Displacement based on a coordinate system created using nodes in the model those can move during the simulation
-
Report Generator V201.12
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: Mechanical
Create Word report direct from an ANSYS Mechanical model. The Word template can be modified by the user. Customer tailored versions can be made to include additional Mechanical features, section headings and text objects etc.
-
Report Generator V192.11
Supports Ansys: 19.2, 2019 R1, 2019 R2
Target Application: Mechanical
Create Word report direct from an ANSYS Mechanical model. The Word template can be modified by the user. Customer tailored versions can be made to include additional Mechanical features, section headings and text objects etc.
-
Report Generator V192.1
Supports Ansys: 19.2, 2019 R1
Target Application: Mechanical
Create Word report direct from a Mechanical model. The Word template can be modified by the user. Customer tailored versions can be made to include additional Mechanical features, section headings and text objects etc.
-
Report Generator V192.09
Supports Ansys: 19.2
Target Application: Mechanical
Create Word report direct from a Mechanical model. The Word template can be modified by the user. Customer tailored versions can be made to include additional Mechanical features, section headings and text objects etc.
-
Report Generator V190.08
Supports Ansys: 19
Target Application: Mechanical
Create Word report direct from a Mechanical model. The Word template can be modified by the user. Customer tailored versions can be made to include additional Mechanical features, section headings and text objects etc.
-
Response Surface Reader V3.6
Supports Ansys: 2020 R2
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX and OptiSLang as .dxrom and .omdb files, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V3
Supports Ansys: 19.2
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2.6
Supports Ansys: 19.1
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2.5
Supports Ansys: 19
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2.4
Supports Ansys: 18.2
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2.3
Supports Ansys: 18.1
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2.2
Supports Ansys: 18
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2.1
Supports Ansys: 17.2
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V2
Supports Ansys: 17.1
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Response Surface Reader V1
Supports Ansys: 17
Target Application: DesignXplorer
Response Surface readers to load and evaluate any response surface exported from DX as a .dxrom file, either from Workbench, from Microsoft Excel or using a standalone executable
-
Restart Analysis V3
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Enable the capability to allow for a restart analysis to be performed from a previously solved linked analysis system
-
Restart Analysis V2
Supports Ansys: 18
Target Application: Mechanical
Enable the capability to allow for a restart analysis to be performed from a previously solved linked analysis system
-
Restart Analysis V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Enable the capability to allow for a restart analysis to be performed from a previously solved linked analysis system
-
Results2ASCII V1
Supports Ansys: 18
Target Application: Mechanical
Export results into ASCII format. Files txt are generated including all wanted results organized in columns
-
Rotate View V2
Supports Ansys: 17, 17.1
Target Application: Mechanical
Allow to rotate the model about any of the 3 screen axes by a specified angle for precise viewing of the model in a specified orientation. Useful for re-orienting views such as an axisymmetric model in which the user desires the X axis to point upward
-
Rotordynamics Tools V1
Supports Ansys: 19
Target Application: Mechanical
Expose extended functionality for importing bearing coefficients, plotting whirl orbits in graphics window, getting Campbell diagram data, and setting up typical rotordynamic constraints [Contains source code]
-
SC TFD V1
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: SpaceClaim
Create bend data table for 3D Pipes. Tables for Drawings and/or for Export to Files.
-
SC Toolbox for SpaceClaim V1
Supports Ansys: 19, 19.1, 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2
Target Application: SpaceClaim
Create Standard Geometries of Fastners and Shapes from existing Library.
-
SDC Verifier-ANSYS Plugin V5.3
Supports Ansys: 2019 R3
Target Application: Mechanical
Check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001, DNV C203 (Fatigue); Eurocode3 and DNV C101/C201 (Weld Strength), ABS 2004/2014, DNV-RP-C201 2010 (Plate & Stiffener Buckling); AISC 89/360-10, API RP-2A WSD and LRFD, ISO 19902, Norsok N004 (Offshore). Advanced report generator.
-
SDC Verifier-ANSYS Plugin V5.2
Supports Ansys: 2020 R2
Target Application: Mechanical
Check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001, DNV C203 (Fatigue); Eurocode3 and DNV C101/C201 (Weld Strength), ABS 2004/2014, DNV-RP-C201 2010 (Plate & Stiffener Buckling); AISC 89/360-10, API RP-2A WSD and LRFD, ISO 19902, Norsok N004 (Offshore). Advanced report generator.
-
SDC Verifier-ANSYS Plugin V5.13
Supports Ansys: 19.2
Target Application: Mechanical
This plugin allows a connection between ANSYS and SDC Verifier, software to check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001 (Fatigue); DNV C101/C201 (Weld Strength), ABS/DNV (Plate Buckling); AISC 89/360-10, API RP-2A, ISO 19902, Norsok N004 (Offshore). Advanced report generator.
-
SDC Verifier-ANSYS Plugin V5.12
Supports Ansys: 19.1
Target Application: Mechanical
Check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001 (Fatigue); Eurocode3 and DNV C101/C201 (Weld Strength), ABS 2004/2014, DNV-RP-C201 2010 (Plate Buckling); AISC 89/360-10, API RP-2A, ISO 19902, Norsok N004 (Offshore). Advanced report generator.
-
SDC Verifier-ANSYS Plugin V5.11
Supports Ansys: 19
Target Application: Mechanical
Check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001 (Fatigue); Eurocode3 and DNV C101/C201 (Weld Strength), ABS 2004/2014, DNV-RP-C201 2010 (Plate Buckling); AISC 89/360-10, API RP-2A, ISO 19902, Norsok N004 (Offshore). Advanced report generator.
-
SDC Verifier-ANSYS Plugin V5.1
Supports Ansys: 18.2
Target Application: Mechanical
Check structures according to the following standards: Eurocode3, FEM 1.001, DIN15018, EN13001 (Fatigue); Eurocode3 and DNV C101/C201 (Weld Strength), ABS 2004/2014, DNV-RP-C201 2010 (Plate Buckling); AISC 89/360-10, API RP-2A, ISO 19902, Norsok N004 (Offshore). Advanced report generator.
-
SPEOS Sensor Tools V212.6
Supports Ansys: 2021 R2
Target Application: Workflow
Description : A collection of non-official speos tools to facilitate workflows with SPEOS sensors.
-
Save_DB V1
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
SAVE_DB allows you to save the MAPDL database file
without having to solve the Mechanical model, or cause a
resolve. Just click the icon and the DB file is saved to the solver directory.
-
Selection On Results V2
Supports Ansys: 18, 18.1, 18.2
Target Application: Mechanical
Select Bodies/Nodes/Elements based on results (e.g. VonMises stresses)
-
Selection Toolbar V4
Supports Ansys: 18
Target Application: Mechanical
Provide several facilities to create or manipulate selections in Mechanical. [Contains source code]
-
Selection Toolbar V4
Supports Ansys: 17
Target Application: Mechanical
Provide several facilities to create or manipulate selections in Mechanical. [Contains source code]
-
Sequential Meshing V2.2
Supports Ansys: 17, 17.1, 17.2
Target Application: Meshing
Expose some useful functions for quickly modifying sequential meshing order (mesh parts in a certain sequence)
-
Ship Component Selection V1
Supports Ansys: 2019 R3
Target Application: Mechanical
An advanced tool to automatically create the main components of the ship’s structure from FE mesh (NOT geometry) directly in the Ansys WB environment. The user can automatically create frames and decks no matter how they are placed in the structure. The algorithm analyzes the entire structure and groups the components so that they can be used for further analysis without having to create them manually.
-
Soil Stiffness V201.4
Supports Ansys: 19.2, 2019 R1, 2019 R2, 2019 R3, 2020 R1, 2020 R2, 2021 R1
Target Application: Mechanical
ANSYS Mechanical pre-processing tool to apply a non-linear soil stiffness boundary condition with friction on the structure. Layered soil stiffness data from csv text file can be applied and resulting soil pressure can be plotted.
-
Solder Joint Fatigue Life Prediction V2.5
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Predict fatigue life in solder joint using Darveaux method
-
Solder Joint Fatigue Life Prediction V2.4
Supports Ansys: 18
Target Application: Mechanical
Predict fatigue life in solder joint using Darveaux method [Contains source code]
-
Solder Joint Fatigue Life Prediction V2.3
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Predict fatigue life in solder joint using Darveaux method [Contains source code]
-
SpaceClaim CAD Cleanup V1
Supports Ansys: 2019 R3
Target Application: SpaceClaim
Automate the CAD cleanup process for general applications and offers model preparation and simplification for Icepak, it exports material properties (if available) for a thermal simulation
-
SpaceClaimXL V1
Supports Ansys: 19.1, 19.2, 2019 R1
Target Application: SpaceClaim
SpaceClaimXL allows the user to import a large assembly into SpaceClaimXL. You can view the assembly, search and select any sub-component to "move" into SpaceClaim.
-
Spiderweb V1
Supports Ansys: 18, 18.1, 18.2, 19, 19.1
Target Application: Mechanical
Create a Spiderweb of Link,Spring,Beam,Rigid,Non-LinSprings
-
Spiral Coil Creator V3
Supports Ansys: 19
Target Application: Electronics Desktop
Guided process to easily create parametric planar, simple or 3D complex Coils
-
Spiral Coil Creator V2
Supports Ansys: 17, 17.1, 17.2
Target Application: Electronics Desktop
Guided process to easily create parametric planar, simple or 3D complex Coils for HFSS 3D, HFSS-IE, Q3D or Maxwell 3D designs
-
Spiral Coil Creator V2
Supports Ansys: 18
Target Application: Electronics Desktop
Guided process to easily create parametric planar, simple or 3D complex Coils for HFSS 3D, HFSS-IE, Q3D or Maxwell 3D designs
-
Spreadsheet Based Load Case Combination V1.1
Supports Ansys: 18
Target Application: Mechanical
Supplement the existing Mechanical feature of"Solution Combination" by offering spreadsheet based load case combination
-
Spreadsheet Based Load Case Combination V1
Supports Ansys: 17
Target Application: Mechanical
Supplement the existing Mechanical feature of"Solution Combination" by offering spreadsheet based load case combination
-
Step Skewed Motor Creation V1
Supports Ansys: 19
Target Application: Electronics Desktop
Allow to automatically create a 3D step-skewed electrical machine. One can set either same skew angles and height for each slice or use equal parameters for each slice. Only need is 2D Maxwell Design and to fill the parameters of future machine
-
Stress Envelop V1.3
Supports Ansys: 19.3, 19.4, 2019 R3
Target Application: Mechanical
Create an Envelope of Max/Min Stresses over all the time steps (substeps). User can either scope it to all the time steps or scope to certain time window.
-
Stress Envelop V1.2
Supports Ansys: 18
Target Application: Mechanical
Create an Envelope of Max/Min Stresses over all the time steps (substeps). User can either scope it to all the time steps or scope to certain time window
-
Stress Envelop V1.1
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Create an Envelope of Max/Min Stresses over all the time steps (substeps). User can either scope it to all the time steps or scope to certain time window
-
TCD Extension V1
Supports Ansys: 18.1, 18.2
Target Application: Mechanical
Refer to a simplified way to use the TCD (Theory of Critical Distances) approach. Exploit a mesh of specific dimensions to evaluate the stress condition in components which present notches and other stress concentration features (such as cracks, weld beads…)
-
TU Delft COVID App V1
Supports Ansys: 2019 R3, 2020 R1, 2020 R2
Target Application: Fluent
The TU Delft COVID App standardized the CFD calculation setup of the behaviour of an infected patient which cause the spread of the virus. Default settings for the human expiratory activities (sneezing, coughing, speaking and breathing) enabling engineers and scientists with a basic level of fluid dynamics skills to perform reliable contagion risk calculations in customized environments.
-
Tangential Varying Pressure V2
Supports Ansys: 19
Target Application: Mechanical
Create an object to be able to apply a spatially varying tangential pressure
-
Temp Dep Allow Stress V2
Supports Ansys: 18, 18.1
Target Application: Mechanical
Calculate the stress safety based on a temperature dependent allowable stress values
-
Thermal Comfort V1
Supports Ansys: 17
Target Application: Fluent
Compute Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD) from the solution data and create a report containing the maximum and minimum values of PMV and PPD in the computational domain along with contour of PMV and PPD at different sections across the computation
-
Thermal Cut V1
Supports Ansys: 2019 R1, 2019 R2, 2019 R3, 2020 R1
Target Application: Mechanical
This wizard allows predicting distortion in components during and after a thermal cut process
-
Thermal Output V4.1
Supports Ansys: 18
Target Application: Mechanical
Easily calculate an average temperature or a surface thermal power output in a thermal analysis
-
Thermal Output V4.1
Supports Ansys: 17, 17.1
Target Application: Mechanical
Easily calculate an average temperature or a surface thermal power output in a thermal analysis
-
Thermo-Mechanical Fatigue Life V190.1
Supports Ansys: 19
Target Application: Mechanical
This App calculates LCF/TMF life (based on BAM damage model) of a component operating at high temperature changes in its operational time. . The life is calculated based on accumulated damage.
-
Time Dependent Hydrostatic Pressure V2
Supports Ansys: 19
Target Application: Mechanical
Create an object to be able to apply (and visualize) a time dependent hydrostatic pressure
-
Tire Simulation V2022.1
Supports Ansys: 2022 R1
Target Application: Mechanical
Set up a 2D axisymmetric tire model in the Mechanical. Perform 2D analyses, Map2dto3d and further 3D analyses like Footprint and Steady State Rolling etc., however everything in a 2D static structural analysis system.
-
Tire Simulation V3.6
Supports Ansys: 19, 19.1, 19.2
Target Application: Mechanical
Set up a 2D axisymmetric tire model in the Mechanical. Perform 2D analyses, Map2dto3d and further 3D analyses like Footprint and Steady State Rolling etc., however everything in a 2D static structural analysis system.
-
Topographic STL Maker V3
Supports Ansys: 19, 19.1
Target Application: Workflow
Automatically output three dimensional topographic maps in an STL file format. SRTM data are used to create the maps
-
Topographic STL Maker V2
Supports Ansys: 17, 17.1, 17.2
Target Application: Workflow
Automatically output three dimensional topographic maps in an STL file format. SRTM data are used to create the maps
-
Topographic STL Maker V2
Supports Ansys: 18
Target Application: Workflow
Automatically output three dimensional topographic maps in an STL file format. SRTM data are used to create the maps
-
Toshiba Library V1
Supports Ansys: 2020 R2
Target Application: Electronics Desktop
Twin Builder component library of Toshiba devices
-
Update Email V2
Supports Ansys: 19
Target Application: Workflow
Enable ANSYS Workbench to automatically send emails after completing updates of components/systems/design points in Workbench projects
-
Update Email V1.3
Supports Ansys: 18
Target Application: Workflow
Enable ANSYS Workbench to automatically send emails after completing updates of components/systems/design points in Workbench projects
-
Update Email V1
Supports Ansys: 17, 17.1, 17.2
Target Application: Workflow
Enable ANSYS Workbench to automatically send emails after completing updates of components/systems/design points in Workbench projects
-
User Programmable Features V4
Supports Ansys: 17, 17.1, 17.2, 18, 18.1, 18.2, 19, 19.1, 19.2
Target Application: Mechanical
Allow for the use of User Programmable Features (UPF) within Workbench [Contains source code]
-
User Programmable Features V4
Supports Ansys: 17, 17.1, 17.2
Target Application: Mechanical
Allow for the use of User Programmable Features (UPF) within Workbench [Contains source code]
-
Vacuum Thermal Modeling V1
Supports Ansys: 2020 R1
Target Application: Electronics Desktop
This Wizard helps setup a vacuum thermal model with Icepak in AEDT.
-
nCode Fatigue Result V1
Supports Ansys: 17
Target Application: Mechanical
Display results from nCode in Mechanical [Contains source code]
-
optiSLang Addin collection V8.1
Supports Ansys: 2020 R2
Target Application: Workflow
For Simulation Workflow Building and Process Automation the core is to connect Ansys, any 3rd party and inhouse tools
-
optiSLang DX plugin V2020.1
Supports Ansys: 2020 R2
Target Application: Workflow
DX Plugin exposes Ansys DesignXplorer optimization methods and surrogate models into Ansys optiSLang as custom algorithms and custom surrogates.
-
optiSLang Deep Learning Extension V1.2
Supports Ansys: 2020 R2
Target Application: Workflow
The optiSLang Deep Learning Extension (DLE) is a package that currently contains one surrogate model, the “Feedforward_network ”.