Altair Inspire 2021.0.1 Build 12320
Altair Inspire 2021.0.1 Build 12320 | 2.7 Gb
The Altair Inspire products development team is pleased to announce the availability of Inspire 2021.0.1. Applied early in the product development lifecycle, this software accelerates the creation, optimization, and study of innovative, structurally efficient parts and assemblies through collaboration.
New Features and Enhancements 2021.0.1
Altair Inspire 2021.0.1 includes the following new features, enhancements, or resolved issues.
- Fixed an issue where STL instances did not work correctly after using the Section Cut tool. [IN-23534]
- Fixed an issue with incorrect thickness when running a reanalysis after gauge optimization. [IN-23592]
- Fixed an error that mistakenly caused the Intersecting Parts Found in Model warning to appear and to subsequently prevent Analyze Part workflows from proceeding forward. [IN-23666]
- Fixed an issue where the Convert to Mass feature was not giving the correct answer because the mass moment of inertia value was not being converted with the mass. [IN-23718]
- Fixed an issue where models created in Inspire 2021 that had parts or assemblies deleted or imported in between runs could not be reopened. [IN-23961]
- Fixed a traceback error seen in motion contact models when specifying HM as the SkinMesherMV setting via the devPreference.xml file. [IM-3592]
- Updated the plot range fitting behavior so that it will exclude curves whose appearance has been hidden by using the clickable legend. [IM-3654].
- Fixed the browser in the Plot Manager so that it once again displays information in parentheses for joints, actuators, and motors, which had been missing from the 2021 release. [IM-3665]
- Updated motion animation file handling to allow generation of the .h3d file even in the case of analysis failure or when manually stopping the motion analysis before it has reached the specified end time. [IM-3666]
- Re-established the default value for penetration depth in motion contacts to be 0.1 mm, bringing it back to the value used previously in 2019.1 and earlier releases. [IM-3668]
- Updated the behavior of Reset -> Visible Defaults on the motion contacts microdialog so that it does not alter values that are not currently being shown on the screen. [IM-3672]
- Fixed traceback error seen when entering the Joints tool for reported use case. [IM-3679]
- Fixed the Export Image feature in the Profile Editor so that it works as intended again. [IM-3714]
- Corrected entries in the Plot Manager browser to better handle the case when objects share the exact same name (are not unique). [IM-3724]
- Updated the Motion Contacts guide bar touring behavior for the Next and Previous location buttons. [IM-3736]
- Fixed an issue with incorrect thickness when running a reanalysis after gauge optimization. [IN-23592]
- Fixed an error that mistakenly caused the Intersecting Parts Found in Model warning to appear and to subsequently prevent Analyze Part workflows from proceeding forward. [IN-23666]
- Fixed an issue where the Convert to Mass feature was not giving the correct answer because the mass moment of inertia value was not being converted with the mass. [IN-23718]
- Fixed an issue where models created in Inspire 2021 that had parts or assemblies deleted or imported in between runs could not be reopened. [IN-23961]
- Fixed a traceback error seen in motion contact models when specifying HM as the SkinMesherMV setting via the devPreference.xml file. [IM-3592]
- Updated the plot range fitting behavior so that it will exclude curves whose appearance has been hidden by using the clickable legend. [IM-3654].
- Fixed the browser in the Plot Manager so that it once again displays information in parentheses for joints, actuators, and motors, which had been missing from the 2021 release. [IM-3665]
- Updated motion animation file handling to allow generation of the .h3d file even in the case of analysis failure or when manually stopping the motion analysis before it has reached the specified end time. [IM-3666]
- Re-established the default value for penetration depth in motion contacts to be 0.1 mm, bringing it back to the value used previously in 2019.1 and earlier releases. [IM-3668]
- Updated the behavior of Reset -> Visible Defaults on the motion contacts microdialog so that it does not alter values that are not currently being shown on the screen. [IM-3672]
- Fixed traceback error seen when entering the Joints tool for reported use case. [IM-3679]
- Fixed the Export Image feature in the Profile Editor so that it works as intended again. [IM-3714]
- Corrected entries in the Plot Manager browser to better handle the case when objects share the exact same name (are not unique). [IM-3724]
- Updated the Motion Contacts guide bar touring behavior for the Next and Previous location buttons. [IM-3736]
Altair Inspire 2021.0.1 Build 12320
Applied early in the product development lifecycle, Altair Inspire accelerates the creation, optimization, and study of innovative, structurally efficient parts and assemblies through collaboration.
Inspire's award winning user experience for geometry creation and modification can be learned in just a few hours, and delivers dependable Altair solver power:
- Structural analysis with Altair SimSolid's speed and accuracy - as independently validated by NAFEMS - provides the ability to analyze large assemblies and complex parts.
- Dynamic motion simulation, including loads extraction, using the reliable multi-body systems analysis of Altair MotionSolve.
- The industry standard for structural efficiency, topology optimization by Altair OptiStruct, for the generative design of practical, viable and manufacturable geometry.
Inspire enables both simulation analysts and designers to perform what-if studies faster, easier, and above all earlier, encouraging collaboration and reducing product time to market.
Altair Inspire Overview
Altair is a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.
Product: Altair Inspire
Version: 2021.0.1 Build 12320
Supported Architectures: x64
Website Home Page : www.altair.com
Language: english
System Requirements: PC *
Size: 2.7 Gb
Operating Systems:
- Windows 10 (64 bit)
- Windows 8.1 (64 bit)
- Windows 7 (64 bit)
Hardware:
- OpenGL graphics card with at least 256 MB of onboard memory
- Note: Integrated Intel graphics hardware is currently not supported.
Memory:
- 4 GB of RAM (8 GB recommended)
- 10 GB or more of free hard disk space
- Windows 10 (64 bit)
- Windows 8.1 (64 bit)
- Windows 7 (64 bit)
Hardware:
- OpenGL graphics card with at least 256 MB of onboard memory
- Note: Integrated Intel graphics hardware is currently not supported.
Memory:
- 4 GB of RAM (8 GB recommended)
- 10 GB or more of free hard disk space
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Altair Inspire 2021.0.1 Build 12320]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Altair Inspire 2021.0.1 Build 12320
