Altair Inspire Mold 2021.2.0
Altair Inspire Mold 2021.2.0 | 2.8 Gb
The software developer Altair is pleased to announce the availability of Inspire Mold 2021.2.0. This update includes the new features and enhancements.
New Features and Enhancements 2021.2.0
Altair Inspire Mold 2021.2 includes the following new features and enhancements
Integration With Altair SimLab
When running an analysis, you can automatically export your model and perform advanced meshing in SimLab.
![Altair Inspire Mold 2021.2.0]()
The available meshing tools include:
- Mesh Controls: Modify any aspect of the mesh, including the geometry, and features such as fillets and washers, and logos, etc.
- Surface Mesh: Once the mesh controls have been modified, use this tool to generate, visualize, and query the surface mesh.
- Volume Mesh: After adjusting the mesh controls and iterating on the surface mesh, use this tool to generate the volume mesh.
- Save and Exit: Use this option to save changes to the mesh, exit the SimLab interface, and return to Inspire Cast. Theanalysis calculations will begin automatically.
Option To Run On A Remote Server
You can now run molding analysis on a remote server using Altair PBS Professional. New options have also been added to run jobs locally either in parallel or in sequence.
![Altair Inspire Mold 2021.2.0]()
Thickness
The solver now includes a new result that shows the thickness of the part
![Altair Inspire Mold 2021.2.0]()
When running an analysis, you can automatically export your model and perform advanced meshing in SimLab.
Altair Inspire Mold 2021.2.0
The available meshing tools include:
- Mesh Controls: Modify any aspect of the mesh, including the geometry, and features such as fillets and washers, and logos, etc.
- Surface Mesh: Once the mesh controls have been modified, use this tool to generate, visualize, and query the surface mesh.
- Volume Mesh: After adjusting the mesh controls and iterating on the surface mesh, use this tool to generate the volume mesh.
- Save and Exit: Use this option to save changes to the mesh, exit the SimLab interface, and return to Inspire Cast. Theanalysis calculations will begin automatically.
Option To Run On A Remote Server
You can now run molding analysis on a remote server using Altair PBS Professional. New options have also been added to run jobs locally either in parallel or in sequence.
Altair Inspire Mold 2021.2.0
Thickness
The solver now includes a new result that shows the thickness of the part
Altair Inspire Mold 2021.2.0
View Cube
A new navigation cube has been added to the view controls in the lower left corner of the modeling window, replacing the old View Rotator.
![Altair Inspire Mold 2021.2.0]()
- Clicking a major face (Top, Bottom, Right, Left, Rear, or Front) rotates the model to the nearest possible orientation of that face. If that orientation is not the standard, clicking the face again re-aligns the model back to the standard orientation. If the orientation is already standard, repeated clicks on a major face reverses the view.
- Clicking the arrows incrementally rotates the view. Left- and right-clicking increments by + and - 15 degrees while middleclicking increments by 90 degrees.
- The display and behavior of the View Cube can be adjusted in the Preferences under File→Preferences→Inspire→Visualization.
Extrude Tool
Use the Extrude tool to sketch profiles in one or two directions. Create a new part or combine, subtract, or intersect the extruded shape with existing parts
![Altair Inspire Mold 2021.2.0]()
Pattern Tool
Use the Pattern tools to create a linear or circular pattern of parts or faces.
![Altair Inspire Mold 2021.2.0]()
Offset Tool
Use the Offset tool on the Geometry ribbon to offset parts or surfaces.
![Altair Inspire Mold 2021.2.0]()
A new navigation cube has been added to the view controls in the lower left corner of the modeling window, replacing the old View Rotator.
Altair Inspire Mold 2021.2.0
- Clicking a major face (Top, Bottom, Right, Left, Rear, or Front) rotates the model to the nearest possible orientation of that face. If that orientation is not the standard, clicking the face again re-aligns the model back to the standard orientation. If the orientation is already standard, repeated clicks on a major face reverses the view.
- Clicking the arrows incrementally rotates the view. Left- and right-clicking increments by + and - 15 degrees while middleclicking increments by 90 degrees.
- The display and behavior of the View Cube can be adjusted in the Preferences under File→Preferences→Inspire→Visualization.
Extrude Tool
Use the Extrude tool to sketch profiles in one or two directions. Create a new part or combine, subtract, or intersect the extruded shape with existing parts
Altair Inspire Mold 2021.2.0
Pattern Tool
Use the Pattern tools to create a linear or circular pattern of parts or faces.
Altair Inspire Mold 2021.2.0
Offset Tool
Use the Offset tool on the Geometry ribbon to offset parts or surfaces.
Altair Inspire Mold 2021.2.0
Additional Changes and Enhancements for Geometry
- The sketch Intersect tool can now be applied to parts or surfaces.
- Inspire now reads surface color meta data from Catia files
Altair Inspire Mold 2021.2.0
Altair Inspire Mold provides a modern integrated approach to streamline design for manufacturing (DfM) of injection molded components. Simulation is finally democratized and placed in the hands of designers and product engineers early in the development cycle, enabling easy exploration of options and delivering improved products, reduced scrap and tooling rework costs.
Watch Altair leaders explain how virtual testing, validation, correction, and optimization of molding designs can be easily performed, providing access to evaluation of injection molded part manufacturability that mitigates common manufacturing defects (warping, sink marks, short shots, etc.) long before a mold is made.
Introducing Altair Inspire Mold
Altair is a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.
Product: Altair Inspire Mold
Version: 2021.2.0 Build 2582
Supported Architectures: x64
Website Home Page : www.altair.com
Languages Supported: english
System Requirements: PC *
Size: 2.8 Gb
Operating Systems:
- Windows 7, Windows 8.1, Windows 10
- 64 bit only
Hardware:
- OpenGL graphics card with at least 256 MB of onboard memory
- Integrated Intel graphics hardware is currently not supported/li>
Memory:
- 4 GB of RAM (8 GB recommended)
- 10 GB or more of free hard disk space
- Windows 7, Windows 8.1, Windows 10
- 64 bit only
Hardware:
- OpenGL graphics card with at least 256 MB of onboard memory
- Integrated Intel graphics hardware is currently not supported/li>
Memory:
- 4 GB of RAM (8 GB recommended)
- 10 GB or more of free hard disk space
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Altair Inspire Mold 2021.2.0]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Altair Inspire Mold 2021.2.0
