BETA-CAE Systems 19.1.3
BETA-CAE Systems 19.1.3 | 2.0 Gb
BETA CAE Systems announces the third bug-fix release of ANSA/EPILYSIS/META v19.1.x series. Apart from fixes in the detected issues, this version also hosts noteworthy enhancements and implementations.
BETA CAE Systems 19.1.3 release notes - Date: June 19, 2019
Please, note the addition of 'CFD_2 layout', a new layout that appears on ANSA Launcher window. It is an alternative mode, suitable for handling large CFD model geometries, which neutralizes the highlight effect in functions such as Points > Insert, Faces > Cut, Curves > New, in order to maintain high operational performance.
Enhancements and known issues resolved in ANSA
Enhancements in ANSA
Data Management
New script functions to switch between ANSA keyword and DM type are now available:
dm.GetObjectTypeFromAnsaKeyword()
dm.GetAnsaKeywordFromObjectType()
ANSA keyword is the generic keyword of an entity type as shown in the database browser e.g. ANSA_SUBYSTEM, ANSA_SIMULATION_MODEL while the DM type is the exact type of the entity, as described in the data model through the dm_structure.xml.
Connections & Assembly
A new option, Connnectivity[Sort], is now added in the context menu of Spotweld, Gumdrop, Screw and Rivet connections. The Sort option re-arranges the connectivity fields according to the relative positions of the projections in space. For example, in case of a spotweld that connects 3 flanges, after the execution of the function, the middle flange should be referenced in the P2 field.
Shell Mesh
Upon execution of function ELEMENTs > Offset [Copy] with option "Add to PID", "specific" and ID=0, a new, copy-PID is now created for each existing PID.
Volume Mesh
Apart from significant improvements in the quality of the layers and mesh of Hextreme Snap, noteworthy performance improvements have been implemented in Cavity functionality: The Volume creation time has been decreased almost to half.
Moreover, Octree algorithms, Wrap [Variable Length] and Hextreme, are now able to capture identified features like fillets and 3D holes from the original geometry and imprint their boundaries on the resulting generated mesh as FE-Perimeters.
Optimization
Upon the DOE Setup via the Optimization Tool, selected values of the DOE table are now assigned to the Current Values of the respective Design Variables, through the context menu.
Known issues resolved in ANSA
GUI
The Cut Plane function, activated from Utilities menu, would not show layers on geometric faces with laminate property.
Model Browser
Upon execution of base. RemoveEmptyPartsGroups() script function, Empty Parts/ Groups would not be recursively deleted. As a result, there were cases where empty Parts/ Groups would still remain after the application of the function.
Data Management
Unexpected termination would occur under certain circumstances, when saving ANSA representation files of Subsystems in DM, under Model Browser > DM [Save in DM].
Connections & Assembly
Unexpected termination would occur, when Applying a Connector defined on Assembly Points and - at the same time - Loadcase Points were pointing to the corresponding Interface nodes of the Assembly Points.
Moreover, realization of mesh-dependent seamwelds would fail, if the connectivity was defined using ANSA groups.
FE Representations
Unexpected termination would occur for some 'flange-to-flange' mesh independent FE Rep. types, such as SHELL-CONTAC, RADIOSS WELD, PSE98, MPC-CBUSH-MPC, CBUSH-CBAR-CBUSH, if projections failed during realization.
TOPO
Upon execution of Points > New [Num.Input] functionality, import CSV would not work, if the file was located inside DM path.
DECKs
In Deck Info function, non-visible Rigid Body elements would erroneously be taken into account in mass calculation.
CFD DECKs
During Output, Polygon faces lying on internal boundaries between volumes would have erroneous orientation.
PERMAS
When reading and writing a MEDINA model for PERMAS solution, K1,K2 shear stiffness of BEAM property would be erroneous, leading to abnormal termination of the analysis.
Optimization
Upon FE Output from Optimization Tool, when selected solver was OPTISTRUCT, output of ⚹.fem files would not be available.
Enhancements and known issues resolved in EPILYSIS
Enhancements in EPILYSIS
General
Compresed ANSA Database is now supported as input file, through command line execution.
Known issues resolved in EPILYSIS
General
Unexpected error termination would occur on Windows OS, in case the output and/or the scratch files directories were not specified and the current working directory had no write permissions.
Furthermore, a PLOAD2 on set with magnitude defined by expression was not regarded as varying, but as constant, when a solution was performed directly from ANSA.
Output
Wrong output filenames would be given, in case input file did not contain ".edb" suffix and output directory contained ".".
Enhancements and known issues resolved in META
VR
Sketch commands created from within the To-Do list do not pass to the other collaborators anymore. On the contrary, each collaborator can keep his/her own notes without conflicts, while in collaboration.
DECKs
48-bit DIAdem results are now supported, as well as Element type 130 for MARC.
Managing Curve Data
Beam history variables are now supported from binout and elout file for LS-DYNA.
Known issues resolved in META
General
While switching among active models, performance would deteriorate if the "Model Action" menu was set to "Load to Active Model".
Graphics & Drawing
Color of Pid would unintentionally be replaced by color of Include or ANSA part, under certain focus or pick actions.
NASTRAN
Unexpected termination would occur when reading geometry from HDF5 file.
ANSYS
Centroid values for second order triangular elements could be incorrect, when reading results.
States & Animation
Unexpected termination could occur when creating Generated States.
Fringebar
Changing fringebar pallete on a window would erroneously affect the coloring of models in other windows.
Isofunctions > Export
Saving IsoFunctions in binary STL format in Windows would create corrupt files.
Project Files & METADB
METADB file could be wrongly saved, in case of reading Nastran Aux Force results.
Enhancements in ANSA
Data Management
New script functions to switch between ANSA keyword and DM type are now available:
dm.GetObjectTypeFromAnsaKeyword()
dm.GetAnsaKeywordFromObjectType()
ANSA keyword is the generic keyword of an entity type as shown in the database browser e.g. ANSA_SUBYSTEM, ANSA_SIMULATION_MODEL while the DM type is the exact type of the entity, as described in the data model through the dm_structure.xml.
Connections & Assembly
A new option, Connnectivity[Sort], is now added in the context menu of Spotweld, Gumdrop, Screw and Rivet connections. The Sort option re-arranges the connectivity fields according to the relative positions of the projections in space. For example, in case of a spotweld that connects 3 flanges, after the execution of the function, the middle flange should be referenced in the P2 field.
Shell Mesh
Upon execution of function ELEMENTs > Offset [Copy] with option "Add to PID", "specific" and ID=0, a new, copy-PID is now created for each existing PID.
Volume Mesh
Apart from significant improvements in the quality of the layers and mesh of Hextreme Snap, noteworthy performance improvements have been implemented in Cavity functionality: The Volume creation time has been decreased almost to half.
Moreover, Octree algorithms, Wrap [Variable Length] and Hextreme, are now able to capture identified features like fillets and 3D holes from the original geometry and imprint their boundaries on the resulting generated mesh as FE-Perimeters.
Optimization
Upon the DOE Setup via the Optimization Tool, selected values of the DOE table are now assigned to the Current Values of the respective Design Variables, through the context menu.
Known issues resolved in ANSA
GUI
The Cut Plane function, activated from Utilities menu, would not show layers on geometric faces with laminate property.
Model Browser
Upon execution of base. RemoveEmptyPartsGroups() script function, Empty Parts/ Groups would not be recursively deleted. As a result, there were cases where empty Parts/ Groups would still remain after the application of the function.
Data Management
Unexpected termination would occur under certain circumstances, when saving ANSA representation files of Subsystems in DM, under Model Browser > DM [Save in DM].
Connections & Assembly
Unexpected termination would occur, when Applying a Connector defined on Assembly Points and - at the same time - Loadcase Points were pointing to the corresponding Interface nodes of the Assembly Points.
Moreover, realization of mesh-dependent seamwelds would fail, if the connectivity was defined using ANSA groups.
FE Representations
Unexpected termination would occur for some 'flange-to-flange' mesh independent FE Rep. types, such as SHELL-CONTAC, RADIOSS WELD, PSE98, MPC-CBUSH-MPC, CBUSH-CBAR-CBUSH, if projections failed during realization.
TOPO
Upon execution of Points > New [Num.Input] functionality, import CSV would not work, if the file was located inside DM path.
DECKs
In Deck Info function, non-visible Rigid Body elements would erroneously be taken into account in mass calculation.
CFD DECKs
During Output, Polygon faces lying on internal boundaries between volumes would have erroneous orientation.
PERMAS
When reading and writing a MEDINA model for PERMAS solution, K1,K2 shear stiffness of BEAM property would be erroneous, leading to abnormal termination of the analysis.
Optimization
Upon FE Output from Optimization Tool, when selected solver was OPTISTRUCT, output of ⚹.fem files would not be available.
Enhancements and known issues resolved in EPILYSIS
Enhancements in EPILYSIS
General
Compresed ANSA Database is now supported as input file, through command line execution.
Known issues resolved in EPILYSIS
General
Unexpected error termination would occur on Windows OS, in case the output and/or the scratch files directories were not specified and the current working directory had no write permissions.
Furthermore, a PLOAD2 on set with magnitude defined by expression was not regarded as varying, but as constant, when a solution was performed directly from ANSA.
Output
Wrong output filenames would be given, in case input file did not contain ".edb" suffix and output directory contained ".".
Enhancements and known issues resolved in META
VR
Sketch commands created from within the To-Do list do not pass to the other collaborators anymore. On the contrary, each collaborator can keep his/her own notes without conflicts, while in collaboration.
DECKs
48-bit DIAdem results are now supported, as well as Element type 130 for MARC.
Managing Curve Data
Beam history variables are now supported from binout and elout file for LS-DYNA.
Known issues resolved in META
General
While switching among active models, performance would deteriorate if the "Model Action" menu was set to "Load to Active Model".
Graphics & Drawing
Color of Pid would unintentionally be replaced by color of Include or ANSA part, under certain focus or pick actions.
NASTRAN
Unexpected termination would occur when reading geometry from HDF5 file.
ANSYS
Centroid values for second order triangular elements could be incorrect, when reading results.
States & Animation
Unexpected termination could occur when creating Generated States.
Fringebar
Changing fringebar pallete on a window would erroneously affect the coloring of models in other windows.
Isofunctions > Export
Saving IsoFunctions in binary STL format in Windows would create corrupt files.
Project Files & METADB
METADB file could be wrongly saved, in case of reading Nastran Aux Force results.
BETA-CAE Systems 19.1.3
BETA-CAE Systems 19.1.3
BETA-CAE Systems 19.1.3
About BETA CAE Systems Software. BETA CAE Systems transformed CAE by introducing revolutionary automation software tools and practices into Simulation and Analysis processes almost 30 years ago.
Committed to our mission to enable engineers to deliver results of high value, we continue to offer state-of-the-art, high-performance software and best-in-class services. Our simulation solutions liberate low risk and high Return-On-Investment innovation.
The ground breaking technology, the excellent services and our high standards of business ethics are the three pillars on which BETA was founded and grows since then.
Our passion for engineering, our drive for excellence, and our loyalty to customers and partners, are the key ingredients of our success. We first established our reputation in the Automotive sector and now we are proud of the deployment of our software also in the Aerospace, Defense, Biomechanics, Electronics, Energy and other Industries. Our solutions exceed their requirements in all the simulation disciplines, and allow them to develop the right product, for the right market, at the right time.
- ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary functionality for full-model build up, from CAD data to ready-to-run solver input file, in a single integrated environment.
- META is a thriving multi-purpose post-processor meeting diverging needs from various CAE disciplines.It owes its success to its impressive performance, innovative features and capabilities of interaction between animations, plots, videos, reports and other objects.
- CAD to ANSA Translators . Porting product data and meta-data from diverse CAD systems to CAE pre-processing is a challenging task that requires advanced and configurable tools. The CAD data to ANSA translators meet the industries requirements by offering a wide portfolio of supported CAD formats, settings and options. Offered with ANSA or as add-on to it, the translators, allow the trouble-free kick off of the CAE processing.
- EPILYSIS serves as a contemporary solution in the field of Finite Element Analysis, embodying the accumulated knowledge from 30 years of collaboration with the CAE community. It covers numerous solution types and intends to bridge the gap between pre- and post- processing for disciplines such as Structural, NVH, Optimization, and more.
About BETA CAE Systems. BETA CAE Systems is a private engineering software company committed to the development of state of the art CAE software systems that meet the requirements of all simulation disciplines. The company’s products, the ANSA pre-processor/ EPILYSIS solver and META post-processor suite, and SPDRM, the simulation-process-data-and-resources manager, hold a worldwide leading position across a range of industries, including the automotive, railway vehicles, aerospace, motorsports, chemical processes engineering, energy, electronics, heavy machinery, power tools, and biomechanics.
Product: BETA CAE Systems
Version: 19.1.3
Supported Architectures: x64
Website Home Page : www.beta-cae.com
Language: english
System Requirements: PC *
Supported Operating Systems: Windows 7even or newer
Size: 2.0 Gb
Recommended system requirements
CPU: 4-core/8-thread intel i7 CPU (e.g. i7 960)
Memory: 16GB
HDD: 1TB
Network: 1Gbit, StaticIP
Recommended GPU (OpenCL Support) requirementsAMD
Radeon HD 7xxx, 6xxx (with at least 1GB of video memory size)
Firepro W series, V series(with at least 1GB of video memory size)
NVIDIA
Tesla (all)(with at least 1GB of video memory size)
Quadro (with at least 1GB of video memory size)
Intel *
i3, i5, i7
* Intel Platform is also supported, with the prerequisite that Intel SDK for OpenCL Applications 2012-13 is already installed.
Minimum system requirements for CAD to ANSA translators
Windows 7
Microsoft Visual C++ 2005 Redistributable Package
Microsoft Visual C++ 2008 Redistributable Package
Microsoft Visual C++ 2010Redistributable Package
CPU: 4-core/8-thread intel i7 CPU (e.g. i7 960)
Memory: 16GB
HDD: 1TB
Network: 1Gbit, StaticIP
Recommended GPU (OpenCL Support) requirementsAMD
Radeon HD 7xxx, 6xxx (with at least 1GB of video memory size)
Firepro W series, V series(with at least 1GB of video memory size)
NVIDIA
Tesla (all)(with at least 1GB of video memory size)
Quadro (with at least 1GB of video memory size)
Intel *
i3, i5, i7
* Intel Platform is also supported, with the prerequisite that Intel SDK for OpenCL Applications 2012-13 is already installed.
Minimum system requirements for CAD to ANSA translators
Windows 7
Microsoft Visual C++ 2005 Redistributable Package
Microsoft Visual C++ 2008 Redistributable Package
Microsoft Visual C++ 2010Redistributable Package
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![BETA-CAE Systems 19.1.3]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
BETA-CAE Systems 19.1.3
