CAMWorks 2022 SP2

1. CW-114429 CSR-18857 System From CW2022 SP0 version onwards, when CAMWorks is loaded as an Add-In within SOLIDWORKS without a valid license, it causes SOLIDWORKS to crash instead of running in Demo mode. This happens when the language setting is any language other than English.
2. CW-114351 CSR-19655 Operation Specific Turning operation using Prime turning insert doesn't get posted when the Canned cycle output checkbox is checked.
3. CW-114301 CSR-19217 System The specific assembly when loaded in CAMWorks causes SOLIDWORKS to crash.
4. CW-114183 CSR-19473 Operation Difference in machining time for operation with same parameters in CW2019 and CW2022 version.
5. CW-113871 CSR-19416 Tool Default tool attachment point for custom holder is in the wrong place
6. CW-113777 CSR-19407 TechDB In TechDB SQLite, if any strategy is created with apostrophe ('), then an error message pops up and will not be able to create the strategy with that.
7. CW-113699 CSR-19405 Features Problem with Open Pocket feature it ignores Feature Sketch.
8. CW-113493 CSR-19327 Mill The specific Multiaxis operation is not allowing a scallop value.
9. CW-113484 CSR-19226 TechDB In TechDB, under tap cutting strategies, the depth criteria condition added for tools from 156 to 215 are wrong, by default it should be ( Feature depth - 0 ).
10. CW-113482 CSR-19127 Feature In the attached part, on EMF it does not recognize the hole features
11. CW-113223 CSR-19271 Toolpath Model movement is getting slow in the tool path editing in CAMWorks 2022 shows the performance issue.
12. CW-113222 CSR-19227 Tool TCP Point not exporting the tip offset with Prime Inserts
13. CW-113181 CSR-19250 UIF Metric values are used instead of Inch on Entry/Retract Tab/ Clearance when using the up or down arrows.
14. CW-113173 CSR-19247 Stock For a specific Mill part, the stock is not getting updated correctly.
15. CW-113162 CSR-19225 Translation Incorrect translation of few strings for in wrapped feature selection window in Chinese-traditional language.
16. CW-113143 CSR-19214 Features Automatic Feature Recognition is unable to find all MSHole instances for the specific part.
17. CW-113122 CSR-19185 TechDB In the TechDB, for a hognose tool if you enter the end radius same as the flute length then it shows message about effective length which is not available in the UI.
18. CW-113017 CSR-19076 Operation In an assembly, have a several identical setups, a new operation is always inserted in the first setup or the wrong setup.
19. CW-113034 CSR-19096 Toolpath In Contour Mill operation defined on a curve feature, if lead in point is defined at the start point ,then it does not calculate correct lead out and lead in/out overlap moves.
20. CW-112993 CSR-19075 Stock For the specific part, if you select the cylindrical stock and change the axis to Y, then it does not calculate the stock and SOLIDWORKS becomes unresponsive.
21. CW-112902 CSR-18960 Translation Change of the description of toolpath center under CNC finish parameters in German Language.
22. CW-112864 CSR-19110 Toolpath Step Thru performance has dropped dramatically in CAMWorks 2021Plus SP4 and CAMWorks 2022 SP1.
23. CW-112855 CSR-18916 Translation Wrong translations in German language.
24. CW-112843 CSR-18895 Operation Contour Mill operation with tab has a slight offset of 0.1mm from the part thickness.
25. CW-112817 CSR-18844 Setup The CAMWorks Setup orientation changes after switching configs in SolidWorks assembly.
26. CW-112809 CSR-18841 Toolpath Canned Cycle: Z Position Error resulting from toolpath calculation issue.
27. CW-112738 CSR-18733 Stock The stock by STL file with checking the 'Use to create bounding box' is not displaying at the simulation stock. In the latest release, the said checkbox is not saved after exiting the Stock Manager user interface.
28. CW-112719 CSR-18645 TechDB The incorrect 'Range Overlap' warning message or there is no message warning where required is observed at the Turn Feature and Operations UI of the TechDB.
29. CW-112692 CSR-18695 VoluMill For the specific part, the VoluMill toolpath is ignoring the Avoid Areas.
30. CW-112681 CSR-18692 VoluMill The VoluMill toolpath generated for the Perimeter Open Pocket feature is not computing correctly stock at the air segment boundary area. Working correctly in CW 2019 release.
31. CW-112567 CSR-18681 Toolpath For a specific Mill assembly, while generating toolpath using WIP option for Z-level operation, the CAMWorks application crashes.
32. CW-112514 CSR-18614 VoluMill The specific VoluMill toolpath ignores possible entry points and is unable to create the entry drill operation when the rest machining is set by WIP considering any stock type.
33. CW-112172 CSR-18550 Toolpath For roughing operation with "plunge rough" pattern, the parameter "final cut amount" is greyed out as per the application. But while generating toolpath it will consider the value which is previously added to that parameter, which is wrong.
34. CW-112098 CSR-18491 Setup Sheet While outputting the machining time into setup sheet, it calculates only the feed time and rapid time and does not consider the non-cutting time.
35. CW-111721 CSR-18165 Features For the specific part, wrong feature creation using sketch observed during Automatic Feature Recognition.
36. CW-111621 CSR-18142 Operation For the attached customer file, the drilling operation displays machining time as 1200 mins which is incorrect.
37. CW-111505 CSR-18021 Simulation Strange undercut is seen in the attached assembly file during simulation.
38. CW-111502 CSR-18068 Toolpath In Mill-Turn, editing the Circular Pattern instances and executing the Generate Toolpath is switched the sequential approach to making the alternating move the toolpath considering the pattern.
39. CW-111477 CSR-18052 Machine Simulation Single Stock/Part STL files created for both Main and Sub Spindles when running CAMWorks Virtual Machine.
40. CW-111458 CSR-18014 Toolpath The specific Turn Rough Grooving toolpath is making the retract move cause the gauge. This happens when either the radial or axial allowance is making "0" allowance.
41. CW-111399 CSR-17996 Toolpath A Negative Leadin/Leadout Overlap on a curve feature will produce an incorrect toolpath
42. CW-111354 CSR-17921 ShopFloor For the attached customer assembly file ShopFloor file is published, but unable to open the file in ShopFloor application.
43. CW-111024 CSR-17885 Toolpath The contour mill toolpath on the pocket feature is making the overcut move when the entry method is "spiral" with "Without compensation". This happens when the leading type is either "Parallel" or "Arc". Work correctly with the entry method "None".
44. CW-110726 CSR-17748 VoluMill The 3 Axis VoluMill toolpath on this part has unneeded toolpath moves at the bottom level of the toolpath.
45. CW-110725 CSR-17747 VoluMill For the specific Mill part, the toolpath generated using 3Axis VoluMill generates unnecessary additional moves at the top of the stock.
46. CW-110545 CSR-17552 System Multiaxis: performance Slow opening operations.
47. CW-110061 CSR-17385 VoluMill 2.5 Axis VoluMill doesn't follow designated leadin point when the Pocket feature has a bottom radius
48. CW-110064 CSR-17383 Operation Avoid area doesn't work when using "On Center" tool condition
49. CW-109943 CSR-17004 Feedrate Whenever leadin overlap is added and in link between tab if it is changed to staydown or direct, then the leadin feedrate is not passed to leadin overlap cut and instead XY feedrate is passed which is wrong.
50. CW-109595 CSR-17005 Rebuild The stepover changes incorrectly for the specific face mill operation up on Rebuild.
51. CW-109495 CSR-16957 Toolpath When Tab cutting is used with CNC compensation ON and "without compensation" then it generates wrong toolpath when perimeter feature is selected.
52. CW-109298 CSR-16959 Toolpath Tab Cutting causes Ramping to break up the machining and make air cuts.
53. CW-106715 CSR-15920 Toolpath In Contour Mill operation, when Ramp is used along with Tab Cutting parameter, then the toolpath generated is incorrect. As it gets machined at incorrect depth and duplicate passes are generated all over the parts.
54. CW-105894 CSR-15596 TechDB When adding and saving tools from CAMWorks to the TechDB, round off errors occur for tool parameters resulting in failure to find the tools on the basis of their Diameter, Shank and Shoulder Diameter values
55. CW-104876 CSR-15196 Machine Simulation For the specific Mill-Turn part, the custom Chuck placement defined using a SOLIDWORKS assembly is incorrectly displayed in CAMWorks Virtual Machine.
56. CW-104298 CSR-14886 Turn Unsuppressing the specific Turn Rough operation with Pinch turning deletes sync code.
57. CW-102375 CSR-13992 Toolpath For the specific Mill part, the ‘Cleanup Pass’ of the Rough Mill toolpath generated for its Rectangular pocket feature with an island does not work properly except when the Pattern type is set to ‘Spiral’. It makes an unnecessary entry spiral move.
58. CW-101470 CSR-13635 System The CAM data in specific part file that was programmed using CAMWorks 2019 cannot be restored in CAMWorks 2020 or newer versions.
59. CW-100232 CSR-13219 System SOLIDWORKS crashes when switching on CAMWorks.
60. CW-99974 CSR-13076 Toolpath For Mill-Turn parts, when the Step Through command is executed for the Rough Mill toolpath generated for its OD feature, the ‘Step through’ window displays X0 as the first move in posted output which is incorrect.
61. CW-99354 CSR-12946 Toolpath The 'Ramp on Leadin' doesn’t work correctly in the 2.5 Axis Roughing Entry method.
62. CW-98952 CSR-12807 Simulation The specific Multiaxis toolpath is slow to simulate. This happens when gauge check against tolerance value is set by '0' value.
63. CW-98657 CSR-11036 CSR-11037 Toolpath For the specific mill part, the Contour Mill toolpath generated for the Slot feature with Taper machines the Air segment leading to incorrect lead-in and lead-out.
64. CW-98508 CSR-12524 Assembly Unable to complete associate features operation with the MS feature in assembly mode. After applying the 'Replace' button, the 'OK' doesn't work. Using 'Cancel' to exit the window the application crash.
65. CW-98199 CSR-12237 Features For the specific part, the feature definition is getting an offset in Z, when editing the feature and changed the end condition value. This happens when the part body is constructed on the XY plane with made extrude on -Z.
66. CW-98160 CSR-12292 Post For Turn Threading operations generated for Turn/MillTurn parts, if the Number of spring passes assigned in the Thread tab is ‘1’ and part is post processed, then on post processing, no spring pass is generated. User has to input a value of ‘2’ in Thread tab to get one spring pass.
67. CW-97974 CSR-12033 Toolpath For Mill parts and Assemblies with hole features, if an Avoid Area is defined for one of the hole features, then the depth of the Contour Mill toolpaths generated for non-Avoid hole features exceed the chamfering depth resulting in gouging/tool breakage.
68. CWR-2018 CSR-19563 Toolpath The tool is gauging due to the wrong depth move of the Area Clearance toolpath in a group of pocket features although the link depth processing is set by ‘To depth by region’. OK with the Priv. Engine.
69. CWR-2009 CSR-19121 Toolpath The advanced method Z level toolpath does not consider the rest machining by WIP. The valid toolpath is available by the previous method engine.
70. CWR-2007 CSR-19116 Toolpath Area clearance toolpath with lace pattern generates some unwanted small moves that can create problem in machining.
71. CWR-2006 CSR-19051 Toolpath When Reverse stepover is used in the Area clearance operation with Lace pattern, then it does not change the stepover direction.
72. CWR-1992 CSR-18326 Toolpath The Area Clearance toolpath with WIP rest machining is making the poor performance and also the toolpath quality is not satisfactory when regenerating from the legacy engine CAMWorks 2021.
73. CWR-1989 CSR-18172 System For the attached customer part, when the Z level operation with contain area is generated then internal crash( Error 105) is observed.
74. CWR-1916 CSR-15810 UIF Disable Corner Rounding in Z Level Helical in the UI and GTP as it isn't supported
75. CWR-1880 CSR-14695 Toolpath For the specific Mill part for which a Z Level toolpath bounded by a Contain Area has been generated, the userdefined Z allowance value is not considered.
76. CWR-1814 CSR-13452 Toolpath For the specific Mill part for which the stock has been defined using an STL file, maintaining the surface finish about X, Y & Z negative allowance is not removing material correctly on the vertical plane. The Z level of the stock has a negative value thus provisioning for material removal but desired removal is not attained.