InventorCAM 2021 SP2
InventorCAM 2021 SP2 | 4.6 Gb
Languages: 中文, Čeština, Dansk, Nederlands, English, Français, Deutsch, עברית, Magyar,
Italiano, 日本語, 한국어, Polski, Português, Русский, Español, Türkçe
Languages: 中文, Čeština, Dansk, Nederlands, English, Français, Deutsch, עברית, Magyar,
Italiano, 日本語, 한국어, Polski, Português, Русский, Español, Türkçe
SolidCAM is pleased to announce the availability of new version CAM software – InventorCAM 2021 SP2. Base release added Powerful New Tool Table – ToolKit (important especially for Mill-Turn & Swiss-Type customers) and also provides additional advanced functionality in all modules – 2.5D Milling, HSR, HSM, Sim. 5x, Mill-Turn and Swiss-Type.
SOL-17353 This version of CIMCO Editor can only run as an integrated part of SolidCAM
SOL-17348 Turkish/GUI problems
SOL-17346 G-code/part\_tool\_tag is 0 if @change\_tool is from MCO
SOL-17344 SolidCAM crashes when unsuppressing MCO
SOL-17342 G-code/part\_tool\_tag changes to 0 in @start\_of\_job
SOL-17335 Machine Preview/MCO/Submachine Movement
SOL-17330 Language/Italian/GUI problems
SOL-17320 Gcode/iMachining/relative mode \+ subproc
SOL-17310 Gcode/Spindle\_orientation always 0
SOL-17307 MCO/ Manual Part Transfer/ Stock not shown in MP and MAC position is wrong
SOL-17290 Language/Dutch/GUI problems
SOL-17287 Gcode/Spindle\_position if tool is Flipped
SOL-17286 Gcode/face4x with plane/opos levels
SOL-17281 CimcoEditor - Drill not exported
SOL-17278 NTT/Tool Viewer/The tool assembly is not correctly represented
SOL-17274 GDU/wrong anext and apos
SOL-17269 MCO/Z position is not correct in submachine movement
SOL-17268 CimcoEditor - inch export - units wrong
SOL-17263 G-code/part\_tool\_tag is 0 for MW operations in @change\_tool
SOL-17262 3\+2 || Gouge retreat through the target
SOL-17248 Machine Preview/Wrong position of tool and position changes when change between modes
SOL-17247 CAM Tree/Setup/Message asking to ignore jobs already calculated not displayed
SOL-17245 MCO/SolidCAM get stuck when opening Machine Preview for newly added MCO
SOL-17231 Contour3D/Variable depth Not generated down step
SOL-17227 SC is crashed by calculating cam-part
SOL-17226 Machine Preview || "unsupported operation" error message and crash
SOL-17225 All languages/Facemill/Technology/Hatch/GUI problems
SOL-17219 5x Drill/Unknown exception in Calculate
SOL-17208 G-code/Wrong coordinates with sub-proc
SOL-17205 MCO/Wrong position of BS when turning Axes Synchronization OFF
SOL-17200 NC output for a clamping situation
SOL-17197 Calculation and NC Program for all Setups in one Step
SOL-17194 2.5D/Wrong coordinates in pcode when using compensation
SOL-17193 Integrated Cimco provides false results
SOL-17190 Channel Synchronization/not possible to change channel label after delete and relabel
SOL-17186 Tool gets a suffix \_1 when it is moved from memory to magazine
SOL-17164 iMachining || 3D iMachining gouge on cutting passes
SOL-17141 Milling-HSM- wrong updated feed rate and no warning when G coding feed out of range in Rapid feed in HSM
SOL-17105 HSR-HSM/Custom Triangulation/Need to avoid duplicate geometry type values
SOL-17102 turning\\pgen\\no retract if Limit by cutter angle defined
SOL-17061 ToolKit / Quick search / Cannot activate the search for new created library
SOL-17036 Order of components are Wrong
SOL-17035 Adaptor Conection Point don't accept Minus Value
SOL-16956 Problem with stock position on 2nd Mac
SOL-16946 iMachining/Weird bump in toolpath
SOL-16943 Facemilling/Finish Floor Only still adds a Roughing Pass
SOL-16942 Templates/Turning Template doesn't register change of Working Area
SOL-16938 Possibly Tool Definition Issues
SOL-16936 No spin \(S\) is displayed for 5x jobs in SolidCAM Simulator
SOL-16927 profile/ lead in and lead out/ will not appear with come on
SOL-16924 STL Milling holder/ some holders will not calculate in HSM
SOL-16913 3\+2 || Exception to be removed
SOL-16909 No Tool ID in CAM Tree possible
SOL-16901 Crash/SolidCAM crashes when trying to simulate operation with standalone
SOL-16890 G-code/rt\_move values for MCO submachine movement in Part CS
SOL-16882 NTT Tool Import in Component Libary
SOL-16876 iMachinig 2D/change of the diameter is not shown correctly in operation
SOL-16819 G-code/Differences between pos center set in @arc for turning job between 2020\(and earlier\) and 2021
SOL-16793 Channel Sync Dialog | Wrong Button without Function
SOL-16778 No Lead in ARC greater that 0 possible
SOL-16772 problem on generating G-code on Angular-head post using transform
SOL-16757 Support of Multi Bodies in CAD to import in Tool Components Library
SOL-16756 Import of Toolassemblys must be inactive when editing Toolcomponentslibary
SOL-16751 spindle\_position & multi\_tool\_pos is wrong
SOL-16707 Menu Customization | Does not work
SOL-16699 Turning/Cycle-XZ\\Sigma/Change of simulation on changing Rough offset
SOL-16690 Apply Transform to multi operation does not work
SOL-16670 Korean\\GUI\\NTT\\Button mm>inch
SOL-16659 Damage to the model due to iMachining
SOL-16638 Trochiodal turning, no roughing paths
SOL-16592 MP - 3D Profil - Not possible to save cutting Diameter
SOL-16582 Turning\\Operation doesn’t calculate
SOL-16474 GUI/Cz version with ENG expression
SOL-16443 Turbo HSR/Restroughing/Entry from outside without a ramp
SOL-16440 Turbo HSR/avoidable full cuts
SOL-16400 NTT/Converting TAB Files may be wrong
SOL-16391 Calculation possible if other configuration is open
SOL-16347 MaschSim/finished Part wrong orientation
SOL-16299 Pocket/Finishing/Option wall and floor finish/wrong sequence
SOL-16254 MP - Not Possible to Use Tool Number for Threadmilling/Tool Diameter to big
SOL-16228 No Tool Diameter Thread Milling
SOL-16192 Crash SolidCAM if SolidCAM Simulator use DirextX
SOL-16178 NTT-ITAC/Drag and drop/Crash
SOL-16145 NewSim/NewSim didn't work and then crash
SOL-16066 get\_drive\_unit\_name/NTT/2021/wrong output from get drive unit name
SOL-15934 Machine Simulation/Ext. Grooving/Shape Tool/Collision report between stock and tool holder
SOL-15839 NTT\\Error message by selecting angle A
SOL-15721 THSR-THSM/Tool-boundary relation as Tangent issue
SOL-15684 Templates/Change spin value with loaded tool isn't saved
SOL-15598 MST/SWX Configurations are not recognized and taken into account
SOL-15528 GCode / feed\_type incorrect in multiple operations
SOL-15282 GCODE/ extend window about Gcode generation in order to see full job name
SOL-15187 Radial Roughing || Unknown exception
SOL-15071 THSM || Lollipop tool is not supported
SOL-14976 G-Code/Wrong lpos on AB TT machine for HSR operation
SOL-14893 iMachining2D/iFinish gouges stock with rapid move
SOL-14522 Time to load a tooltable is to long
SOL-13681 Additional arc in Pcode
SOL-12894 MachSim/Simulation of groove operation is not correct
SOL-12801 Select faces\\ Bug in find faces according to selected color functionality
SOL-12714 Link been defined equal on entry and exit - not been performed
SOL-12499Turning tool/Origin Position/The origin position is not properly represented in the Machine Preview
SOL-12441 machsim\\face\grooving\false simulation Fixed
SOL-11693 Korean\\GUI problem
SOL-10338 Gcode/Face4x \+ 4x INDEXIAL angle
SOL-4076 Machsim \\ two work pieces - Both stocks are not shown at same time
Enhancements
- HSR/HSM Basic
- CimcoEditor improvements
- HSR/ Passes/ Add Roughing stepdown to UI
- Machine Setup - Show transparent stock as temporary on selected Table Station
- THSM improvements
- NTT improvements
- Rotary Machining improvements
- Cam settings / open pocket technology
- MCO improvements
- Save prz files without closing the part
SOL-17348 Turkish/GUI problems
SOL-17346 G-code/part\_tool\_tag is 0 if @change\_tool is from MCO
SOL-17344 SolidCAM crashes when unsuppressing MCO
SOL-17342 G-code/part\_tool\_tag changes to 0 in @start\_of\_job
SOL-17335 Machine Preview/MCO/Submachine Movement
SOL-17330 Language/Italian/GUI problems
SOL-17320 Gcode/iMachining/relative mode \+ subproc
SOL-17310 Gcode/Spindle\_orientation always 0
SOL-17307 MCO/ Manual Part Transfer/ Stock not shown in MP and MAC position is wrong
SOL-17290 Language/Dutch/GUI problems
SOL-17287 Gcode/Spindle\_position if tool is Flipped
SOL-17286 Gcode/face4x with plane/opos levels
SOL-17281 CimcoEditor - Drill not exported
SOL-17278 NTT/Tool Viewer/The tool assembly is not correctly represented
SOL-17274 GDU/wrong anext and apos
SOL-17269 MCO/Z position is not correct in submachine movement
SOL-17268 CimcoEditor - inch export - units wrong
SOL-17263 G-code/part\_tool\_tag is 0 for MW operations in @change\_tool
SOL-17262 3\+2 || Gouge retreat through the target
SOL-17248 Machine Preview/Wrong position of tool and position changes when change between modes
SOL-17247 CAM Tree/Setup/Message asking to ignore jobs already calculated not displayed
SOL-17245 MCO/SolidCAM get stuck when opening Machine Preview for newly added MCO
SOL-17231 Contour3D/Variable depth Not generated down step
SOL-17227 SC is crashed by calculating cam-part
SOL-17226 Machine Preview || "unsupported operation" error message and crash
SOL-17225 All languages/Facemill/Technology/Hatch/GUI problems
SOL-17219 5x Drill/Unknown exception in Calculate
SOL-17208 G-code/Wrong coordinates with sub-proc
SOL-17205 MCO/Wrong position of BS when turning Axes Synchronization OFF
SOL-17200 NC output for a clamping situation
SOL-17197 Calculation and NC Program for all Setups in one Step
SOL-17194 2.5D/Wrong coordinates in pcode when using compensation
SOL-17193 Integrated Cimco provides false results
SOL-17190 Channel Synchronization/not possible to change channel label after delete and relabel
SOL-17186 Tool gets a suffix \_1 when it is moved from memory to magazine
SOL-17164 iMachining || 3D iMachining gouge on cutting passes
SOL-17141 Milling-HSM- wrong updated feed rate and no warning when G coding feed out of range in Rapid feed in HSM
SOL-17105 HSR-HSM/Custom Triangulation/Need to avoid duplicate geometry type values
SOL-17102 turning\\pgen\\no retract if Limit by cutter angle defined
SOL-17061 ToolKit / Quick search / Cannot activate the search for new created library
SOL-17036 Order of components are Wrong
SOL-17035 Adaptor Conection Point don't accept Minus Value
SOL-16956 Problem with stock position on 2nd Mac
SOL-16946 iMachining/Weird bump in toolpath
SOL-16943 Facemilling/Finish Floor Only still adds a Roughing Pass
SOL-16942 Templates/Turning Template doesn't register change of Working Area
SOL-16938 Possibly Tool Definition Issues
SOL-16936 No spin \(S\) is displayed for 5x jobs in SolidCAM Simulator
SOL-16927 profile/ lead in and lead out/ will not appear with come on
SOL-16924 STL Milling holder/ some holders will not calculate in HSM
SOL-16913 3\+2 || Exception to be removed
SOL-16909 No Tool ID in CAM Tree possible
SOL-16901 Crash/SolidCAM crashes when trying to simulate operation with standalone
SOL-16890 G-code/rt\_move values for MCO submachine movement in Part CS
SOL-16882 NTT Tool Import in Component Libary
SOL-16876 iMachinig 2D/change of the diameter is not shown correctly in operation
SOL-16819 G-code/Differences between pos center set in @arc for turning job between 2020\(and earlier\) and 2021
SOL-16793 Channel Sync Dialog | Wrong Button without Function
SOL-16778 No Lead in ARC greater that 0 possible
SOL-16772 problem on generating G-code on Angular-head post using transform
SOL-16757 Support of Multi Bodies in CAD to import in Tool Components Library
SOL-16756 Import of Toolassemblys must be inactive when editing Toolcomponentslibary
SOL-16751 spindle\_position & multi\_tool\_pos is wrong
SOL-16707 Menu Customization | Does not work
SOL-16699 Turning/Cycle-XZ\\Sigma/Change of simulation on changing Rough offset
SOL-16690 Apply Transform to multi operation does not work
SOL-16670 Korean\\GUI\\NTT\\Button mm>inch
SOL-16659 Damage to the model due to iMachining
SOL-16638 Trochiodal turning, no roughing paths
SOL-16592 MP - 3D Profil - Not possible to save cutting Diameter
SOL-16582 Turning\\Operation doesn’t calculate
SOL-16474 GUI/Cz version with ENG expression
SOL-16443 Turbo HSR/Restroughing/Entry from outside without a ramp
SOL-16440 Turbo HSR/avoidable full cuts
SOL-16400 NTT/Converting TAB Files may be wrong
SOL-16391 Calculation possible if other configuration is open
SOL-16347 MaschSim/finished Part wrong orientation
SOL-16299 Pocket/Finishing/Option wall and floor finish/wrong sequence
SOL-16254 MP - Not Possible to Use Tool Number for Threadmilling/Tool Diameter to big
SOL-16228 No Tool Diameter Thread Milling
SOL-16192 Crash SolidCAM if SolidCAM Simulator use DirextX
SOL-16178 NTT-ITAC/Drag and drop/Crash
SOL-16145 NewSim/NewSim didn't work and then crash
SOL-16066 get\_drive\_unit\_name/NTT/2021/wrong output from get drive unit name
SOL-15934 Machine Simulation/Ext. Grooving/Shape Tool/Collision report between stock and tool holder
SOL-15839 NTT\\Error message by selecting angle A
SOL-15721 THSR-THSM/Tool-boundary relation as Tangent issue
SOL-15684 Templates/Change spin value with loaded tool isn't saved
SOL-15598 MST/SWX Configurations are not recognized and taken into account
SOL-15528 GCode / feed\_type incorrect in multiple operations
SOL-15282 GCODE/ extend window about Gcode generation in order to see full job name
SOL-15187 Radial Roughing || Unknown exception
SOL-15071 THSM || Lollipop tool is not supported
SOL-14976 G-Code/Wrong lpos on AB TT machine for HSR operation
SOL-14893 iMachining2D/iFinish gouges stock with rapid move
SOL-14522 Time to load a tooltable is to long
SOL-13681 Additional arc in Pcode
SOL-12894 MachSim/Simulation of groove operation is not correct
SOL-12801 Select faces\\ Bug in find faces according to selected color functionality
SOL-12714 Link been defined equal on entry and exit - not been performed
SOL-12499Turning tool/Origin Position/The origin position is not properly represented in the Machine Preview
SOL-12441 machsim\\face\grooving\false simulation Fixed
SOL-11693 Korean\\GUI problem
SOL-10338 Gcode/Face4x \+ 4x INDEXIAL angle
SOL-4076 Machsim \\ two work pieces - Both stocks are not shown at same time
Enhancements
- HSR/HSM Basic
- CimcoEditor improvements
- HSR/ Passes/ Add Roughing stepdown to UI
- Machine Setup - Show transparent stock as temporary on selected Table Station
- THSM improvements
- NTT improvements
- Rotary Machining improvements
- Cam settings / open pocket technology
- MCO improvements
- Save prz files without closing the part
InventorCAM 2021 SP2
SolidCAM is a CAM software that integrates directly into SolidWorks and Inventor. Officially approved partners and all that. Their CNC programming toolsets look and feel like the CAD systems as much as possible, making the learning curve shorter. You define, calculate and verify all your machining operations without leaving the CAD environment. They can handle programming 2.5- to 5-axis machining, high-speed surface milling, wire EDM, etc. Their models are fully associative, so your toolpaths update when you make a part change. There are no import/export hassles, and you don’t have to learn some CAM system’s idea of a CAD application to make them work.
SolidCAM 2021 is BEST version ever. It has a Powerful New Tool Table – ToolKit (important especially for Mill-Turn & Swiss-Type customers). It also provides additional advanced functionality in all modules – 2.5D Milling, HSR, HSM, Sim. 5x, Mill-Turn and Swiss-Type.
What's New in SolidCAM 2021 - NEW SolidCAM Simulator
SolidCAM Inc is a world leader in advanced tool path generation technology (CAM) running directly inside SolidWorks. SolidCAM features a full line of CNC machine programming software solutions ranging from 2 axis lathes and 3 axis mills to extremely complex multi-axis MillTurn machines and Wire Edm. All products run directly inside SolidWorks and provide the user with a true "SolidWorks look and feel" for ease of use and maximum efficiency. Along with the integrated interface and scalability for new machines, SolidCAM also has its patented "iMachining" that powers users to new levels of productivity and profits, through unmatched cycle time reduction and unrivaled tool life.
Product: InventorCAM
Version: 2021 SP2 build 120168
Supported Architectures: x64
Website Home Page : www.solidcam.com
Language: multilanguage
System Requirements: PC *
Software Prerequisites: InventorCAM 2018-2021
Size: 4.6 Gb
Microsoft Windows 10 x64 Professional and Enterprise Editions; Microsoft Windows 8.1 x64 Professional and Enterprise Editions (with latest Service Pack); Microsoft Windows 7 x64 Professional and Ultimate Editions (with latest Service Pack)
- Intel Xeon, Intel Core, Intel Core 2 Duo, Intel Core 2 Quad or higher (If you use other processors we assume no responsibility and no support)
- 4 GB RAM (for the processing of large components, we recommend 8 GB RAM (or more)
- 15 GB free disk space for installation
- Hard disk with at least 100 GB of storage
- NVIDIA graphics card of the current Quadro series with min. 512 MB (1024 MB recommended) and current, certified graphics driver (With the use of other and on-board graphics cards, we accept no responsibility and no support)
- 1,280 x 1,024 or higher screen resolution
- Microsoft Direct3D 9 or compatible graphics card (Microsoft Direct3D 11 or higher recommended)
- USB 2.0 interface
- DVD drive
- Intel Xeon, Intel Core, Intel Core 2 Duo, Intel Core 2 Quad or higher (If you use other processors we assume no responsibility and no support)
- 4 GB RAM (for the processing of large components, we recommend 8 GB RAM (or more)
- 15 GB free disk space for installation
- Hard disk with at least 100 GB of storage
- NVIDIA graphics card of the current Quadro series with min. 512 MB (1024 MB recommended) and current, certified graphics driver (With the use of other and on-board graphics cards, we accept no responsibility and no support)
- 1,280 x 1,024 or higher screen resolution
- Microsoft Direct3D 9 or compatible graphics card (Microsoft Direct3D 11 or higher recommended)
- USB 2.0 interface
- DVD drive
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![InventorCAM 2021 SP2]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
InventorCAM 2021 SP2
