Tags
Language
Tags

Nemetschek SCIA Engineer 2019 version 19.0.2018

Posted By: scutter
Nemetschek SCIA Engineer 2019 version 19.0.2018

Nemetschek SCIA Engineer 2019 version 19.0.2018 | 3.1 Gb

SCIA part of the Nemetschek Group has launched SCIA Engineer 2019 version 19.0.2018. This release brings multiple workflow improvements as well as many new functionalities that will help you handle the analysis of multi-storey buildings and other civil engineering structures with minimum effort while simultaneously increasing the overall efficiency of standard day-to-day tasks.

- An issue with inappropriate warning is fixed.
- Fixed problem with empty load case in linear stability analysis.
- Calculation: Fix of crash in load panel.
- Fixed problem with empty load case in linear stability analysis.
- Nonlinear function "press only" is automatically added to nonlinear type of hinge on 2D member edge.
- Update of web help
- CDD calculation for unsymmetrical ribs has been fixed
- Missing references from beams to buckling data are now corrected instead of beams being removed.
- LP Crash during load generation on panel with Accurate (FEM) method is fixed
- Fix in generation of mesh for projects with slabs, which have slightly inclined LCS, which caused problems in load projection.
- LP Crash during load generation on panel with Accurate (FEM) method is fixed
- Fixed issue where detailed story results on model did not match those in the table results (when only part of model was selected)
- Results fixed the missing results for Bill of materials in the Table results.
- Steel IBC: Fixed an issue in which a change to the buckling factors was not accounted for in the Steel Check.
- Steel The Alpha and Beta factor that is being used in formula 6.41 (EN1993-1-1) is limited between the ranges 1 and 6.
- Steel IBC Fixed a crash in the Steel Check caused by using members as 'Structural Model only'
- License for SIA has been added to CDD and CLC protection has been changed as well
- Notation of angles has been synchronized to Beta angles
- Concrete EN Explanation note in calculation of depth of effective concrete is modified.
- Calculation of limit crack width for beam slab has been fixed for Dutch NEN NA
- Composite analysis model fixed definition of rigid diaphragms in solver analysis model in conflict with duplicate nodes (0D contacts, hinges, cross-links)
- Fixed issue where report templates did not keep indentations intact
- Fixed issue where report templates did not keep indentations intact
- Fixed an issue where the Engineering report would jump to the first page after editing items. (duplicate)
- There was a TLX file missing for a sub table in Bill of material. Because of that the engineering report system tried to create a default file but failed probably because of access permissions to the file system in this specific user environment. The TLX file is now added.
- Fixed an issue where the Engineering report would jump to the first page after editing items (duplicate)
- Fixed an issue where the Engineering report would jump to the first page after editing items (duplicate)
- Fixed problem in solver during update Load panels.
- Normal forces on integration strip when results are provided between sections is fixed.
- Fixed issue with integration strip results. There was a variation between a load case and a combination which only contained that load case when they should have had consistent results.
- The limit for number of lines (1000 lines) which a cross section consists of was increased.
- Crash of solver during analysis of seismic load cases is fixed
- Crash of solver during analysis of seismic load cases is fixed
- Concrete Fixed crash in CDD.

Nemetschek SCIA Engineer 2019 version 19.0.2018

Reduce the time spent on your project with SCIA Engineer 19 that expands the array of possibilities for multi-storey buildings, streamlines workflows for various analysis types and increases the speed of basic operations.

SCIA Engineer 19 brings multiple workflow improvements as well as many new functionalities that will help you handle the analysis of multi-storey buildings and other civil engineering structures with minimum effort while simultaneously increasing the overall efficiency of standard day-to-day tasks.

With SCIA Engineer 19 you will deliver your projects faster thanks to the design accelerated by automation in all the design modules, improved understanding of the response to applied loads and optimisation through parametric design and integration of SCIA Engineer into any tailored solution.

- Accelerated design
Deliver accurate, economical and clearly documented design with minimum effort thanks to new functions like automated design of practical reinforcement in concrete beams, enhanced optimisation for studs in composite floors, camber in design of steel members, etc.
- Improved understanding of the structure
Have full control over your structure and understand its response using analysis of masonry walls with contact elements, integration members for shear walls or bridges, absence for simulation of constructions stages, stiffness modifiers, extended display options for results, etc.
- Optimisation with parametric design
Move your work to a next level with the parametric design capabilities of SCIA Engineer. Take the advantage of the updated XML interface or a brand-new Open API to build your own solution to deliver the most economical, eye-pleasing variant of the project fast and with minimum of manual work.


Since 1974, SCIA has been developing, distributing and supporting software products for structural engineering and the construction market. Our software is now localized in 13 languages, supports 20 national standards and is distributed in more than 50 countries, giving us a truly global reach. This allows us to efficiently serve local, regional and multi-national engineering companies and organizations on all types of projects, all over the world. SCIA is part of the Nemetschek Group.

Product: Nemetschek SCIA Engineer
Version: 2019 version 19.0.2018
Supported Architectures: 32bit / 64bit
Website Home Page : www.scia.net
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 3.1 Gb

To install SCIA Engineer it is recommended that your system meets the following requirements:

Processor
Minimum: Intel Core-i3 or AMD Ryzen 3
Advised: Intel Core-i7 or AMD Ryzen 7
RAM
Minimum: 2 GB
Advised: 16 GB, or more
Graphics Controller:
Minimum: 256 MB, supporting OpenGL
Advised: 4 GB, or more
Free disk space: 5GB
Resolution: 1280 x 800 (4K Not supported)

Supported Windows OS
- Windows 2008 server 64bit
- Windows 2012 server 64bit
- Windows 7 32/64bit
- Windows 8.1 32/64bit
- Windows 10 32/64bit

SCIA Engineer 19 is compatible with: Revit 2018, Revit 2019
SCIA Engineer 19 is compatible with: Tekla Structures 2017
SCIA Engineer 19 is compatible with: Etabs 9.2
SCIA Engineer 19 is compatible with: IFC version 2x3
SCIA Engineer 19 is compatible with: SDNF version 2.0 / SDNF version 3.0

Please visit my blog

Added by 3% of the overall size of the archive of information for the restoration

No mirrors please


Nemetschek SCIA Engineer 2019 version 19.0.2018