Tags
Language
Tags

Trimble Tekla Tedds 2021 SP1 with Library Update (May 2021)

Posted By: scutter
Trimble Tekla Tedds 2021 SP1 with Library Update (May 2021)

Trimble Tekla Tedds 2021 SP1 with Library Update (May 2021) | 107.7 mb

Trimble launched Tekla Tedds 2021 SP1 (23.1.0000). This release includes a number of enhancements and issue resolutions.

Tekla Tedds 2021 - Service Pack 1
This service pack is required when using the Tekla Tedds Engineering Library May 2021 or later.

Important
If you are running a 64-bit version of Windows you will require both updates.

Eight new functions which can be used when writing custom calculations.

CubeRoot
Calculates the cube root of a value including support for negative values.

CubeRoot( 8 ) = 2
CubeRoot( -8 ) = -2

String List Functions
String list functions allow a list of values to be managed as a single string value where each item in the string is separated by the list separator (normally a comma). For example you might use such a list for recording the positions on a beam where results of interest occur.
The new functions included in this service pack make it easier to manipulate such data.

Example
Two separate operations have resulted in two lists of positions of interest on a beam which are not currently sorted, create a new list which contains all the positions (in mm) from both lists in order from smallest to largest without any duplicates.

a1 = 0.0m; a2 = 0.575m; a3 = 0.63m; a4 = 1.2m
list1 = StringList( "F0", "mm", a1, a2, a3, a4 ) = "0,575,630,1200"
b1 = 0.0m; b2 = 0.325m; b3 = 0.63m; b4 = 0.2m
list2 = StringList( "F0", "mm", b1, b2, b3, b4 ) = "0,325,630,200"
positions = StrListUnion( StrListSort(list1), StrListSort(list2) ) = "0,200,325,575,630,1200"

StrListJoin
StrListJoin can be used to concatenate two string lists.

list1 = StrList( 1, 2, 3 )
list2 = StrList( 4, 5, 6 )
StrListJoin( list1, list2 ) = "1,2,3,4,5,6"
StrListJoin( list2, list1 ) = "4,5,6,1,2,3"

StrListUnique
Removes all consecutive duplicate elements from a sorted string list.

list = StrList( 1, 2, 3, 3, 7, 8, 8, 9, 10, 10, 10, 11 )
StrListUnique( list ) = "1,2,3,7,8,9,10,11"

StrListMerge
Merges two sorted string lists into a single string list.

list1 = StrList( 1, 3, 7 )
list2 = StrList( 2, 6, 8 )
StrListMerge( list1, list2 ) = "1,2,3,6,7,8"

StrListUnion
Creates a sorted string list consisting of the elements that exist in one or both sorted string lists.

list1 = StrList ( 1, 2, 3, 5, 7, 9 )
list2 = StrList( 2, 4, 5, 6, 8, 9 )
StrListUnion( list1, list2 ) = "1,2,3,4,5,6,7,8,9"

StrListIntersection
Creates a sorted string list from two sorted string lists which consists of the elements that exist in both lists.

list1 = StrList ( 1, 2, 3, 5, 7, 9 )
list2 = StrList( 2, 4, 5, 6, 8, 9 )
StrListIntersection( list1, list2 ) = "2,5,9"

StrListDifference
Creates a sorted string list from two sorted string lists consisting of the elements which exist in the first list but not in the second list.

list1 = StrList ( 1, 2, 3, 5, 7, 9 )
list2 = StrList( 2, 4, 5, 6, 8, 9 )
StrListDifference( list1, list2 ) = "1,3,7"
StrListDifference( list2, list1 ) = "4,6,8"

StrListSymmetricDifference
Creates a sorted string list consisting of the elements which exist in either of two sorted string lists but not both.

list1 = StrList ( 1, 2, 3, 5, 7, 9 )
list2 = StrList( 2, 4, 5, 6, 8, 9 )
StrListSymmetricDifference( list1, list2 ) = "1,3,4,6,7,8"

Security
[TEDDS-5564] Updated embedded Chromium browser (CEF) to address security vulnerabilities
[TEDDS-5558] Updated System.Text.Encodings.Web to 4.7.2

Writing Custom Calculations
[TEDDS-5619] Modified the behavior of the developer commands for creating calculation examples to always save the variables in SI units so that numeric precision issues are avoided when saving US examples using US units.
[TEDDS-5620] Enhanced VerifyEqual so that when the result is different the warning message indicates the percentage difference between the two values.
[TEDDS-5546] Fixed the Data List design application not initialising the "Hide grid" and "Fixed splitter" options correctly which resulted in these options being applied randomly when building a data list.

Tekla Tedds Engineering Library (May 2021)

UK and Asia

Concrete specification (BS8500)
Updated in accordance with BS8500-1:2015+A2:2019. Improved user experience so that the majority of the input can be entered on the main page of the user interface.

Other Updates

Calculation writing documentation
Updated the documentation for new and updated functions in Tedds 2021 Service Pack 1, including:
- New CubeRoot function.
- New StrListJoin, StrListMerge, StrListUnique, StrListUnion, StrListIntersection, StrListDifference and StrListSymmetricDifference functions
- Updated sqrt to include the new alias SquareRoot.
- Updated SaveSectionVarsCalcItem and SaveSectionVarsTextFile to save values in SI units by default.
Foundation analysis & design (EN1992/EN1997)
[Tedds-5588] - Corrected item used to display passive sliding resistance check in summary output.
[Tedds-5532] - Corrected analysis model for pad foundations with multiple columns and strip foundations with multiple walls.
[Tedds-5531] - Adjusted user interface to allow users to select which axis the analysis model, moment and shear diagrams are displayed for.
Sketch updates for global compatibility.
Timber frame racking panel design (EN1995)
[TEDDS-5589] - Corrected incorrect argument in function error associated with output control variables.

USA

Footing analysis & design (ACI318)
Enhanced to allow an optional pedestal to be defined for each column or wall. The user experience has also been improved when a design is beyond scope so that more detailed information is provided in the user interface and the output document, results that can be calculated are also now presented for the partial design.

Other Updates

Calculation writing documentation
Updated the documentation for new and updated functions in Tedds 2021 Service Pack 1, including:
- New CubeRoot function.
- New StrListJoin, StrListMerge, StrListUnique, StrListUnion, StrListIntersection, StrListDifference and StrListSymmetricDifference functions
- Updated sqrt to include the new alias SquareRoot.
- Updated SaveSectionVarsCalcItem and SaveSectionVarsTextFile to save values in SI units by default.
Footing analysis & design (ACI318)
[TEDDS-5596]1 - Fixed expression error "Undefined variable '_CriticalSLSLC'"
Fixed overall design preview utilization ratios to consider results for both directions.
Small improvements to user interface.
RC wall design (ACI318)
[TEDDS-5616]1 - Corrected error falsely identifying unbraced slender wall design.

Europe

Calculation writing documentation
Updated the documentation for new and updated functions in Tedds 2021 Service Pack 1, including:
- New CubeRoot function.
- New StrListJoin, StrListMerge, StrListUnique, StrListUnion, StrListIntersection, StrListDifference and StrListSymmetricDifference functions
- Updated sqrt to include the new alias SquareRoot.
- Updated SaveSectionVarsCalcItem and SaveSectionVarsTextFile to save values in SI units by default.
Foundation analysis & design (EN1992/EN1997)
[Tedds-5588]1 - Corrected item used to display passive sliding resistance check in summary output.
[Tedds-5532]1 - Corrected analysis model for pad foundations with multiple columns and strip foundations with multiple walls.
[Tedds-5531]1 - Adjusted user interface to allow users to select which axis the analysis model, moment and shear diagrams are displayed for.
Sketch updates for global compatibility.

Australia

Calculation writing documentation
Updated the documentation for new and updated functions in Tedds 2021 Service Pack 1, including:
- New CubeRoot function.
- New StrListJoin, StrListMerge, StrListUnique, StrListUnion, StrListIntersection, StrListDifference and StrListSymmetricDifference functions
- Updated sqrt to include the new alias SquareRoot.
- Updated SaveSectionVarsCalcItem and SaveSectionVarsTextFile to save values in SI units by default.

Canada

Calculation writing documentation
Updated the documentation for new and updated functions in Tedds 2021 Service Pack 1, including:
- New CubeRoot function.
- New StrListJoin, StrListMerge, StrListUnique, StrListUnion, StrListIntersection, StrListDifference and StrListSymmetricDifference functions
- Updated sqrt to include the new alias SquareRoot.
- Updated SaveSectionVarsCalcItem and SaveSectionVarsTextFile to save values in SI units by default.

Trimble Tekla Tedds 2021 SP1 with Library Update (May 2021)

Tekla Tedds is powerful software developed to meet the needs of the structural engineering workflow and designed to help you automate your repetitive structural calculations. Choose from one or more of our regularly updated calculation libraries or write your own, and create professional documentation every time. Combine your structural calculations with 2D frame analysis.

Tekla Tedds 2021 structural analysis and design calculation software offers new and improved calculations, including base plate, precast hollow core slab, concrete foundation and timber racking loads, to satisfy multiple design codes.

Tekla Structural Designer - Design using Tekla Tedds - Wood member design (NDS)


Tekla software solutions for advanced BIM and structural engineering are produced by Trimble. Trimble’s construction offering ranges from total stations to advanced software, giving the industry tools to transform planning, design, construction and operation of buildings. Tekla software is at the heart of the design and construction workflow, building on the free flow of information, constructible models and collaboration.

Product: Trimble Tekla Tedds
Version: 2021 SP1 (23.1.0000) with Library Update (May 2021)
Supported Architectures: x64
Website Home Page : www.tekla.com
Language: english
System Requirements: PC *
Software Prerequisites: Tekla Tedds 2021 version 23.0.0000 & Engineering Library version 23.1.0000
Size: 107.7 mb

Tekla Structural Designer 2021 hardware recommendations.

System requirements for effective operation

CPU: Multi core Intel i5 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.

Memory: 16GB (32GB or more recommended)
- Memory requirements are highly dependent on model content.

OS: 64-bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.

Graphics: 1600 x 900 resolution (1920 x 1080 or higher recommended)
- 1GB or higher of dedicated RAM.
- Utilizes HOOPS Visualize, a third party graphics engine available from Tech Soft 3D. To check your adapter’s compatibility visit the HOOPS developer website for HOOPS 20.x, DirectX and OpenGL requirements.

Disk space: 1GB or more of free space for installation
- Operational disk space requirements are highly dependent on model content.

Internet connection: Required for access to Online Services and some documentation.

License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5

License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.

Test environments

The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:

- Windows 10 64-bit
- Windows 8.1 64-bit

Tekla Tedds 2021 hardware recommendations:

CPU: Multi core Intel i3 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.

Memory: 2GB
- Memory requirements are dependant on document content.

OS: 32-bit or 64bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
- See Test Environments (below) for full details of supported operating systems.

Graphics: 1920 x 1080 resolution
- 1GB or higher of dedicated RAM.

Disk space: 1GB or more of free space for installation.
- Operational disk space requirements are highly dependant on model content.

Internet connection: Required for access to Online Services and some documentation.

Microsoft Word: 32-bit or 64-bit of Microsoft Word 2013, 2016 or 2019.
- Microsoft Word needs to be fully service packed.

License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5

License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.

The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:

- Windows 10 32-bit & 64-bit
- Windows 8.1 32-bit & 64-bit

Trimble Tekla Structural Design Suite 2021 SP1

Please visit my blog

Added by 3% of the overall size of the archive of information for the restoration

No mirrors please


Trimble Tekla Tedds 2021 SP1 with Library Update (May 2021)