Viaggio in paradiso (2012)

[ About file ]

Name: Viaggio.In.Paradiso.2012.iTALiAN.BRRip.XviD-FTH.avi
Date: Wed, 03 Oct 2012 01:09:28 +0200
Size: 1,524,971,240 bytes (1454.326 MiB)
Note: Analysis not complete

[ Generic infos ]

Duration: 01:36:00 (5759.749 s)
Container: AVI
AVI has index: Yes
Total tracks: 2
Track nr. 0: video
Track nr. 1: audio {VTS_01_1 T80 3_2ch 384Kbps DELAY 0ms}

[ Relevant data ]

Resolution: HIGH (720 x 304)
Width: multiple of 16 (GOOD)
Height: multiple of 16 (GOOD)

[ Video track ]

FourCC: xvid/XVID
Resolution: 720 x 304
Frame aspect ratio: 45:19 = 2.368 (~2.35:1)
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 45:19 = 2.368 (~2.35:1)
Framerate: 23.976 fps
Total frames: 138,096
Stream size: 1,242,955,983 bytes (1185.375 MiB)
Bitrate: 1726.4 kbps
Qf: 0.329
Key frames: 2,207 (0; 51; 59; 63; 66; … 138015)
Null frames: 0
Min key int: 1
Max key int: 250
Avg key int: 62.572
Delay: 0 ms

[ Audio track ]

Audio tag: 0x2000 (AC3)
Channels: 6
Chunks: 89,996
Stream size: 276,467,712 bytes (263.66 MiB)
Bitstream type (bs): AC3
Bitrate (bs): 384 kbps CBR
Sampling frequency (bs): 48000 Hz
Mode (bs): 3 front, 2 rear, 1 LFE
Preload: 192 ms
Max A/V diff: 242 ms
Delay: 0 ms

[ Video bitstream ]

Bitstream type: MPEG-4 Part 2
User data: XviD0050
QPel: Yes
GMC: No
Interlaced: No
Aspect ratio: Square pixels
Quant type: H.263

[ Profile compliancy ]

Selected profile: MTK PAL 6000
Resolution: Ok
Framerate: 23.976 <> 25

This report was created by AVInaptic (25-07-2011) on 4-10-2012 00:09:05

Recovery Volumes (.rev)

Recovery volumes or .rev files are special files which can be created by WinRAR/RAR and allow you to reconstruct missing and damaged files in a volume set. They can
only be used with multi-volume archives.

This feature may be useful for backups or, for example, when you post a multivolume archive to a newsgroup and some of the subscribers did not receive some files. Reposting recovery volumes instead of usual volumes may reduce the total number of files to repost.

Each recovery volume is able to reconstruct one missing RAR volume. For example, if you have 30 volumes and 3 recovery volumes, you are able to reconstruct any 3 missing volumes. If the number of .rev files is less than a number of missing volumes, reconstructing is impossible. The total number of usual and recovery volumes must not exceed 255 and the number of recovery volumes must be less than the number of RAR volumes.

WinRAR reconstructs missing and damaged volumes either when clicking on .rev file, or when using rc command or automatically, if it cannot locate the next volume and finds the required number of .rev files when unpacking.

You may use the "Recovery volumes" option in the Archive name and parameters dialog or a similar option also appears in the Protect archive command to create recovery volumes. In the command line mode you may do it with -rv switch or rv command.

Original copies of damaged volumes are renamed to *.bad before reconstruction. For example, volname.part03.rar will be renamed to volname.part03.rar.bad.

From Win-rar.com