Jimmy Bobo - Bullet to the Head (2012)

[ About file ]

Name: Jimmy.Bobo.Bullet.To.The.Head.2012.iTALiAN.MD.BDRip.XviD-BmA.avi
Date: Fri, 24 May 2013 19:37:40 +0200
Size: 1,436,868,608 bytes (1370.305 MiB)
Note: Analysis not complete

[ Generic infos ]

Duration: 01:31:33 (5493.442 s)
Container: AVI OpenDML
AVI has index: Yes
Total tracks: 2
Track nr. 0: video
Track nr. 1: audio
Junk: VirtualDub build 0/release

[ Relevant data ]

Resolution: VERY HIGH (720 x 384)
Width: multiple of 16 (GOOD)
Height: multiple of 32 (GOOD)

[ Video track ]

FourCC: xvid/XVID
Resolution: 720 x 384
Frame aspect ratio: 15:8 = 1.875
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 15:8 = 1.875
Framerate: 23.976 fps
Total frames: 131,711
Stream size: 1,332,789,384 bytes (1271.047 MiB)
Bitrate: 1940.914 kbps
Qf: 0.293
Key frames: 1,750 (0; 49; 80; 123; 173; … 131474)
Null frames: 0
Min key int: 1
Max key int: 300
Avg key int: 75.263
Delay: 0 ms

[ Audio track ]

Audio tag: 0x55 (MP3)
Channels: 2
Bitrate: 138.664 kbps VBR
Chunks: 228,891
Stream size: 95,218,157 bytes (90.807 MiB)
Bitstream type (bs): MPEG-1 Layer III
Sampling frequency (bs): 48000 Hz
Mode (bs): joint stereo
Padding (bs): Yes
Emphasis (bs): none
Preload: 480 ms
Max A/V diff: 480 ms
Delay: 0 ms

[ Video bitstream ]

Bitstream type: MPEG-4 Part 2
User data: DivX503b1393p
User data: XviD0050
Packed bitstream: Yes (*)
QPel: No
GMC: No
Interlaced: No
Aspect ratio: Square pixels
Quant type: MPEG

[ Profile compliancy ]

Selected profile: MTK NTSC 6000
Resolution: Ok
Framerate: 23.976 <> 30

Recovery Volumes (.rev)

Recovery volumes or .rev files are special files which can be created by WinRAR/RAR and allow you to reconstruct missing and damaged files in a volume set. They can
only be used with multi-volume archives.

This feature may be useful for backups or, for example, when you post a multivolume archive to a newsgroup and some of the subscribers did not receive some files. Reposting recovery volumes instead of usual volumes may reduce the total number of files to repost.

Each recovery volume is able to reconstruct one missing RAR volume. For example, if you have 30 volumes and 3 recovery volumes, you are able to reconstruct any 3 missing volumes. If the number of .rev files is less than a number of missing volumes, reconstructing is impossible. The total number of usual and recovery volumes must not exceed 255 and the number of recovery volumes must be less than the number of RAR volumes.

WinRAR reconstructs missing and damaged volumes either when clicking on .rev file, or when using rc command or automatically, if it cannot locate the next volume and finds the required number of .rev files when unpacking.

You may use the "Recovery volumes" option in the Archive name and parameters dialog or a similar option also appears in the Protect archive command to create recovery volumes. In the command line mode you may do it with -rv switch or rv command.

Original copies of damaged volumes are renamed to *.bad before reconstruction. For example, volname.part03.rar will be renamed to volname.part03.rar.bad.

From Win-rar.com