This book is the result of 40 years of the combined authors’ experience in mechanical and fluid dynamics engineering. It gives an overview of product and process development from the analytical standpoint. This book has not been intended to revolutionize the casting industry. The principals of fluid dynamics and static mechanics were largely developed in the nineteenth century, but process development still largely remains a trial and error method. This book is intended to underline the principals of strength of materials and fluid dynamics that are the foundation of the casting product and process development. This book has been written as a resource and design tool for product and process engineers and designers who work with aluminium castings. It combines many aspects of product and process development, which include the basic principals of static mechanics and fluid dynamics as well as completely developed applications allowing solving problems at every stage of the development process. This book has five main parts: (1) overview of casting processes, (2) fluid dynamics, (3) strength of materials, (4) sand casting, permanent mould, and die casting process development, and (5) quality control.

This book presents the novel concept of plaston, which accounts for the high ductility or large plastic deformation of emerging high-performance structural materials, including bulk nanostructured metals, hetero-nanostructured materials, metallic glasses, intermetallics, and ceramics.

MICROELECTRONIC INTERCONNECTIONS AND MICROASSEMBL Y WORKSHOP 18-21 May 1996, Prague, Czech Republic Conference Organizers: George Harman, NIST (USA) and Pavel Mach (Czech Republic) Summary of the Technical Program Thirty two presentations were given in eight technical sessions at the Workshop. A list of these sessions and their chairpersons is attached below. The Workshop was devoted to the technical aspects of advanced interconnections and microassembly, but also included papers on the education issues required to prepare students to work in these areas. In addition to new technical developments, several papers presented overviews predicting the future directions of these technologies. The basic issue is that electronic systems will continue to be miniaturized and at the same time performance must continue to improve. Various industry roadmaps were discussed as well as new smaller packaging and interconnection concepts. The newest chip packages are often based on the selection of an appropriate interconnection method. An example is the chip-scale package, which has horizontal (x-y) dimensions,;; 20% larger than the actual silicon chip itself. The chip is often flip-chip connected to a micro ball-grid-array, but direct chip attach was described also. Several papers described advances in the manufacture of such packages.

This volume records the proceedings of an international symposium on "ME­ CHANICS OF SHEET METAL FORMING: Material Behavior and Deformation Analysis." It was sponsored and held at the General Motors Research Labora­ tories on October 17-18, 1977. This symposium was the twenty-first in an annual series. The objective of this symposium was to discuss the research frontiers in experimental and theoretical methods of sheet metal forming analysis and, also, to determine directions of future research to advance technology that would be useful in metal stamping plants. Metal deformation analyses which provide guide­ lines for metal flanging are already in use. Moreover, recent advances in computer techniques for solving plastic flow equations and in measurements of material parameters are leading to dynamic models of many stamping operations. These models would accurately predict the stresses and strains in the sheet as a function of punch travel. They would provide the engineer with the knowledge he needs to improve die designs. The symposium papers were organized into five sessions: the state of the art, constitutive relations of sheet metal, role of friction, sheet metal formability, and deformation analysis of stamping operations. We believe this volume not only summarizes the various viewpoints at the time of the symposium, but also pro­ vides an outlook for materials and mechanics research in the future.

Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects.

This book presents the novel concept of plaston, which accounts for the high ductility or large plastic deformation of emerging high-performance structural materials, including bulk nanostructured metals, hetero-nanostructured materials, metallic glasses, intermetallics, and ceramics.

FUNDAMENTAL ASPECTS OF STRUCTURAL ALLOY DESIGN is the proceedings of the tenth Battelle Colloquium in the Materials Sciences, held in Seattle, Washington, and Harrison Hot Springs, B.C., September 15-19, 1975. The theme of the conference was the emerging science of alloy design. Although the relationships of properties of alloys to their composition and structure have long been a dominant theme in physical metallurgy, it is only recently that metallurgists have turned their attention from the analytical, post hoc study of the structure-property relationship to the synthesis approach of alloy design. As usual in the Battelle colloquia, the first day started with a group of introductory lectures presented by leaders in the field, each emphasizing his personal approach to the problem. This provided a historical perspective for the colloquium. These papers, together with the banquet address of Professor J. R. Low, Jr., who was honored at the colloquium, comprise the introductory section of these proceedings. Alloy design is generally specific to a given application. Thus, the needs in alloy design in a number of important applications, gas turbines, electrical-power-generation equipment, airframes, pressure vessels, and nuclear applications were presented in a group of papers. An agenda discus­ sion on "Needs in Alloy Design" followed. These papers give the external constraints on alloy design applications, and criteria for mechanical, physical, and chemical properties for which the alloys must be designed.

This book provides a comprehensive review of the production of smelter grade alumina from bauxite ores. It emphasizes the best practices applied in the industry today but seen in a historical context with a view to future challenges and developments.

Composite Materials in Aerospace Design is one of six titles in a coherent and definitive series dedicated to advanced composite materials research, development and usage in the former Soviet Union. Much of the information presented has been classified until recently. Thus each volume provides a unique insight into hitherto unknown research and development data.

The fact that magnetite (Fe304) was already known in the Greek era as a peculiar mineral is indicative of the long history of transition metal oxides as useful materials. The discovery of high-temperature superconductivity in 1986 has renewed interest in transition metal oxides. High-temperature su­ perconductors are all cuprates. Why is it? To answer to this question, we must understand the electronic states in the cuprates. Transition metal oxides are also familiar as magnets. They might be found stuck on the door of your kitchen refrigerator. Magnetic materials are valuable not only as magnets but as electronics materials. Manganites have received special attention recently because of their extremely large magnetoresistance, an effect so large that it is called colossal magnetoresistance (CMR). What is the difference between high-temperature superconducting cuprates and CMR manganites? Elements with incomplete d shells in the periodic table are called tran­ sition elements. Among them, the following eight elements with the atomic numbers from 22 to 29, i. e. , Ti, V, Cr, Mn, Fe, Co, Ni and Cu are the most im­ portant. These elements make compounds with oxygen and present a variety of properties. High-temperature superconductivity and CMR are examples. Most of the textbooks on magnetism discuss the magnetic properties of transition metal oxides. However, when one studies magnetism using tradi­ tional textbooks, one finds that the transport properties are not introduced in the initial stages.

Electric Arc Furnaces are being greatly improved at a fast pace. This book equips a reader with knowledge necessary for critical analysis of these innovations and helps to select the most effective ones and for their successful implementation.

This book presents the novel concept of plaston, which accounts for the high ductility or large plastic deformation of emerging high-performance structural materials, including bulk nanostructured metals, hetero-nanostructured materials, metallic glasses, intermetallics, and ceramics.

This book presents the novel concept of plaston, which accounts for the high ductility or large plastic deformation of emerging high-performance structural materials, including bulk nanostructured metals, hetero-nanostructured materials, metallic glasses, intermetallics, and ceramics.

Springer Handbook of Condensed Matter and Materials Data provides a concise compilation of data and functional relationships from the fields of solid-state physics and materials in this 1200 page volume. The data, encapsulated in 914 tables and 1025 illustrations, have been selected and extracted primarily from the extensive high-quality data collection Landolt-Börnstein and also from other systematic data sources and recent publications of physical and technical property data. Many chapters are authored by Landolt-Börnstein editors, including the prominent Springer Handbook editors, W. Martienssen and H. Warlimont themselves.