Numerous applications of rod structures in civil engineering, aircraft and spacecraft confirm the importance of the topic. On the other hand the majority of books on structural mechanics use some simplifying hypotheses; these hypotheses do not allow to consider some important effects, for instance the boundary layer effects near the points of junction of rods. So the question concerning the limits of applicability of structural mechanics hypotheses and the possibilities of their refinement arise. In this connection the asymptotic analysis of equations of mathematical physics, the equations of elasticity in rod structures (without these hypotheses and simplifying assumptions being imposed) is undertaken in the present book. Moreover, a lot of modern structures are made of composite materials and therefore the material of the rods is not homogeneous. This inhomogeneity of the material can generate some unexpected effects. These effects are analysed in this book. The methods of multi-scale modelling are presented by the homogenization, multi-level asymptotic analysis and the domain decomposition. These methods give an access to a new class of hybrid models combining macroscopic description with "microscopic zooms".

This book investigates geopolymers and geopolymer-based composites, with a focus on their preparation, geopolymerization mechanisms, microstructures, mechanical properties, and fracture behaviors. Geopolymers are inorganic materials consisting of tetrahedral units (such as SiO4 and AlO4) linked by shared oxygens and forming long-range, covalently bonded and amorphous frameworks. Geopolymers have the advantages of low-temperature preparation, low cost, high heat and corrosion resistivity, and being environmentally friendly.

The Springer Handbook of Nanomaterials covers the description of materials which have dimension on the "nanoscale". The description of the nanomaterials in this Handbook follows the thorough but concise explanation of the synergy of structure, properties, processing and applications of the given material. The Handbook mainly describes materials in their solid phase; exceptions might be e.g. small sized liquid aerosols or gas bubbles in liquids. The materials are organized by their dimensionality. Zero dimensional structures collect clusters, nanoparticles and quantum dots, one dimensional are nanowires and nanotubes, while two dimensional are represented by thin films and surfaces. The chapters in these larger topics are written on a specific materials and dimensionality combination, e.g. ceramic nanowires. Chapters are authored by well-established and well-known scientists of the particular field. They have measurable part of publications and an important role in establishing new knowledge of the particular field.

Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering.

This book presents a comprehensive collection of reviews and experimental research findings in the realm of composite materials. It explores manufacturing technologies and applications, as well as recent breakthroughs in nanomaterial-based composites, polymer-based composites, titanium matrix composites (TMCs), conducting polymers, natural polymers, graphene polymers, graphene composites, and organosulfur polymeric composites, alongside reinforced aluminum matrix composites. The mechanical and tribological aspects take center stage, with a focus on aluminum alloy composites as a superior alternative to traditional gear materials. The book also addresses cutting-edge composite materials developed for drug removal via adsorption techniques, radiation shielding, and their use as shielding absorbers for ionizing radiation. Furthermore, the significance of electrical contact materials and their performance is explored. The book unveils fabrication methods, sample preparation techniques, properties, and various applications of these remarkable composites.

This book reports thermo-mechanical coupling constitutive equations and impact damage distributions of 3-D braided composite materials under impulsive loadings, in multidisciplinary fields among mechanical engineering, textile engineering and impact dynamics. The 3-D braided composite is one of the unique textile composites with integrated braided preform structure.

For the past seventy years, ferrites (magnetic ceramics) have been prized for a range of properties that has no equivalent in the existing metal magnetic materials. They have contributed to many important advances in electronics and new high-performance products are appearing all the time. Ferrite technology has produced greater progress in the past 15 years since the first edition was published. Many of the semiconductor and IC technology responsible for the computer and Internet explosion would not have been possible without the magnetic materials technology needed for powering and otherwise exploiting those developments.

Features twenty-five chapter contributions from an international array of distinguished academics based in Asia, Eastern and Western Europe, Russia, and the USA. This multi-author contributed volume provides an up-to-date and authoritative overview of cutting-edge themes involving the thermal analysis, applied solid-state physics, micro- and nano-crystallinity of selected solids and their macro- and microscopic thermal properties. Distinctive chapters featured in the book include, among others, calorimetry time scales from days to microseconds, glass transition phenomena, kinetics of non-isothermal processes, thermal inertia and temperature gradients, thermodynamics of nanomaterials, self-organization, significance of temperature and entropy. Advanced undergraduates, postgraduates and researchers working in the field of thermal analysis, thermophysical measurements and calorimetry will find this contributed volume invaluable. This is the third volume of the triptych volumes on thermal behaviour of materials; the previous two receiving thousand of downloads guaranteeing their worldwide impact.

This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.

This volume is dedicated to additive manufacturing (AM). It includes chapterss that cover new approaches in AM for biomedical applications and advanced technological solutions.

This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations.